|
codes
& standards
Back
to codes and standards index
Fiberglass Pipes - common Standards
Commonly used standards for fiberglass
pipes and their applications
Some of the fiberglass related standards
from the major standardization organizations:
ASME Standards
Fiberglass related standards from ASME
- American Society of Mechanical Engineers:
- ASME/ANSI B31.1 - POWER PIPING
- ASME/ANSI B31.3 - PROCESS PIPING
- ASME/ANSI B31.9 - BUILDING SERVICES PIPING
ASTM Standards
Fiberglass related standards from ASTM
International
- ASTM C 581 - STANDARD PRACTICE FOR DETERMINING
CHEMICAL RESISTANCE OF THERMOSETTING RESINS USED IN GLASS-FIBER-REINFORCED
STRUCTURES INTENDED FOR LIQUID SERVICE
- ASTM C 582 - STANDARD SPECIFICATION FOR CONTACT-MOLDED
REINFORCED THERMOSETTING PLASTIC (RTP) LAMINATES FOR CORROSION
RESISTANT EQUIPMENT
- ASTM D 149 - STANDARD TEST METHOD FOR DIELECTRIC
BREAKDOWN VOLTAGE AND DIELECTRIC STRENGTH OF SOLID ELECTRICAL
INSULATING MATERIALS AT COMMERCIAL POWER FREQUENCIES
- ASTM D 257 - TEST METHODS FOR DC RESISTANCE
OR CONDUCTANCE OF INSULATING MATERIALS
- ASTM D 638 - STANDARD TEST METHOD FOR TENSILE
PROPERTIES OF PLASTICS
- ASTM D 695M - TEST METHOD FOR COMPRESSIVE PROPERTIES
OF RIGID PLASTICS (METRIC)
- ASTM D 696 - STANDARD TEST METHOD FOR COEFFICIENT
OF LINEAR THERMAL EXPANSION OF PLASTICS BETWEEN - 30 DEGREES
C AND 30 DEGREES C WITH A VITREOUS SILICA DILATOMETER
- ASTM D 790 - STANDARD TEST METHODS FOR FLEXURAL
PROPERTIES OF UNREINFORCED AND REINFORCED PLASTICS AND ELECTRICAL
INSULATING MATERIALS
- ASTM D 792 - TEST METHODS FOR DENSITY AND SPECIFIC
GRAVITY (RELATIVE DENSITY) OF PLASTICS BY DISPLACEMENT
- ASTM D 1598 - STANDARD TEST METHOD FOR TIME-TO-FAILURE
OF PLASTIC PIPE UNDER CONSTANT INTERNAL PRESSURE
- ASTM D 1599 - STANDARD TEST METHOD FOR RESISTANCE
TO SHORT-TIME HYDRAULIC PRESSURE OF PLASTIC PIPE, TUBING,
AND FITTINGS
- ASTM D 2105 - STANDARD TEST METHOD FOR LONGITUDINAL
TENSILE PROPERTIES OF "FIBERGLASS" (GLASS-FIBER-REINFORCED
THERMOSETTING-RESIN) PIPE AND TUBE
- ASTM D 2143 - STANDARD TEST METHOD FOR CYCLIC
PRESSURE STRENGTH OF REINFORCED, THERMOSETTING PLASTIC PIPE
- ASTM D 2290 - STANDARD TEST METHOD FOR APPARENT
HOOP TENSILE STRENGTH OF PLASTICOR REINFORCED PLASTIC PIPE
BY SPLIT DISK METHOD
- ASTM D 2310 - STANDARD CLASSIFICATION FOR MACHINE-MADE
"FIBERGLASS" (GLASS-FIBER REINFORCED THERMOSETTING-RESIN)
PIPE
- ASTM D 2412 - STANDARD TEST METHOD FOR DETERMINATION
OF EXTERNAL LOADING CHARACTERISTICS OF PLASTIC PIPE BY PARALLEL-PLATE
LOADING
- ASTM D 2444 - TEST METHOD FOR DETERMINATION
OF THE IMPACT RESISTANCE OF THERMOPLASTIC PIPE AND FITTINGS
BY MEANS OF A TUP (FALLING WEIGHT)
- ASTM D 2583 - STANDARD TEST METHOD FOR INDENTATION
HARDNESS OF RIGID PLASTICS BY MEANS OF A BARCOL IMPRESSOR
- ASTM D 2584 - STANDARD TEST METHOD FOR IGNITION
LOSS OF CURED REINFORCED RESINS
- ASTM D 2924 - STANDARD TEST METHOD FOR EXTERNAL
PRESSURE RESISTANCE OF "FIBERGLASS" (GLASS-FIBER-REINFORCED
THERMOSETTING-RESIN) PIPE
- ASTM D 2925 - STANDARD TEST METHOD FOR BEAM
DEFLECTION OF "FIBERGLASS" (GLASS- FIBER-REINFORCED THERMOSETTING
RESIN) PIPE UNDER FULL BORE FLOW
- ASTM D 2992 - STANDARD PRACTICE FOR OBTAINING
HYDROSTATIC OR PRESSURE DESIGN BASIS FOR "FIBERGLASS" (GLASS-FIBER-REINFORCED
THERMOSETTING-RESIN) PIPE AND FITTINGS
- ASTM D 2996 - STANDARD SPECIFICATION FOR FILAMENT-WOUND
"FIBERGLASS" (GLASS- FIBER-REINFORCED THERMOSETTING-RESIN)
PIPE
- ASTM D 2997 - STANDARD SPECIFICATION FOR CENTRIFUGALLY
CAST "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN)
PIPE
- ASTM D 3262 - STANDARD SPECIFICATION FOR "FIBERGLASS"
(GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) SEWER PIPE
- ASTM D 3517 - STANDARD SPECIFICATION FOR "FIBERGLASS"
(GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PRESSURE PIPE
- ASTM D 3567 - STANDARD PRACTICE FOR DETERMINING
DIMENSIONS "FIBERGLASS" (GLASS- FIBER-REINFORCED THERMOSETTING
RESIN) PIPE AND FITTINGS
- ASTM D 3615 - CHEMICAL RESISTANCE OF THERMOSET
MOLDING COMPOUNDS
- ASTM D 3681 - STANDARD TEST METHOD FOR CHEMICAL
RESISTANCE OF "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN)
PIPE IN A DEFLECTED CONDITION
- ASTM D 3754 - STANDARD SPECIFICATION FOR "FIBERGLASS"
(GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) SEWER AND INDUSTRIAL
PRESSURE PIPE
- ASTM D 3840 - STANDARD SPECIFICATION FOR "FIBERGLASS"
(GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE FITTINGS
FOR NONPRESSURE APPLICATIONS
- ASTM D 4024 - STANDARD SPECIFICATION FOR MACHINE
MADE "FIBERGLASS" (GLASS-FIBER REINFORCED THERMOSETTING RESIN)
FLANGES
- ASTM D 4161 - STANDARD SPECIFICATION FOR "FIBERGLASS"
(GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE JOINTS USING
FLEXIBLE ELASTOMERIC SEALS
- ASTM D 5365 - STANDARD TEST METHOD FOR LONG-TERM
RING-BENDING STRAIN OF "FIBERGLASS" (GLASS-FIBER-REINFORCED
THERMOSETTING-RESIN) PIPE
- ASTM D 5421 - STANDARD SPECIFICATION FOR CONTACT
MOLDED "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING
RESIN) FLANGES
- ASTM D 5677 - STANDARD SPECIFICATION FOR FIBERGLASS
(GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE AND PIPE
FITTINGS, ADHESIVE BONDED JOINT TYPE, FOR AVIATION JET TURBINE
FUEL LINES
- ASTM D 5685 - STANDARD SPECIFICATION FOR "FIBERGLASS"
(GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PRESSURE PIPE
FITTINGS
- ASTM D 6041 - STANDARD SPECIFICATION FOR CONTACT-MOLDED
"FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING RESIN)
CORROSION RESISTANT PIPE AND FITTINGS
- ASTM E 228 - LINEAR THERMAL EXPANSION OF SOLID
MATERIALS WITH A VITREOUS SILICA DILATOMETER
- ASTM F 1173 - STANDARD SPECIFICATION FOR THERMOSETTING
RESIN FIBERGLASS PIPE SYSTEMS TO BE USED FOR MARINE APPLICATIONS
AWWA Standards
Fiberglass related standards from AWWA - American Water Works
Association
- AWWA C950-01 - Fiberglass Pressure Pipe
- AWWA D120-84 (R89) - Thermosetting Fiberglass-Reinforced
Plastic Tanks
- AWWA F101-02 - Contact-Molded, Fiberglass-Reinforced
Plastic Wash Water Troughs and Launders
- AWWA F102-02 - Matched-Die-Molded, Fiberglass-Reinforced
Plastic Weir Plates, Scum Baffles, and Mounting Brackets
BSi Standards
Fiberglass related standards from BSi
- British Standards institute
- BS 5480 - Specification for glass reinforced
plastics (GRP) pipes, joints and fittings for use for water
supply or sewerage
- BS 6464 - Specification for reinforced plastics
pipes, fittings and joints for process plants
- BS 7159 - Code of practice for design and construction
of glass-reinforced plastics (GRP) piping systems for individual
plants or sites
- BS 8010-2.5 - Code of practice for pipelines
- Pipelines on land: design, construction and installation
- Glass reinforced thermosetting plastics
DIN Standards
Fiberglass related standards from DIN
- Deutsches Institut für Normung
- DIN 53393 - Testing of Textile Glass-reinforced
Plastics; Behavior to the Effect of Chemicals
- DIN 53758 - Testing of plastics articles; determination
of the effect of internal pressure on hollow objects by short-time
test
- DIN 53768 - Determination by extrapolation
of the long-term behavior of glass fiber reinforced plastics
- DIN 53769-1 - Testing of glass fiber reinforced
plastics pipes; determination of the longitudinal shear strength
of type B pipe fittings
- DIN 53769-2 - Testing of glass fiber reinforced
plastics pipes; long-term hydrostatic pressure test
- DIN 53769-3 - Testing of glass fiber reinforced
plastics pipes; determination of initial and long-term ring
stiffness
- DIN 53769-6 - Testing of glass fiber reinforced
plastics pipes; Testing of pipes and fittings under pulsating
internal pressure
- DIN EN 59 - Glass Reinforced Plastics; Measurement
of Hardness by Means of a Barcol Impressor
- DIN EN 637 - Plastics piping systems - Glass-reinforced
plastics components - Determination of the amounts of constituents
using the gravimetric method
- DIN EN 705 - Plastics piping systems - Glass-reinforced
thermosetting plastics (GRP) pipes and fittings - Methods
for regression analyses and their use
- DIN EN 761 - Plastics piping systems - Glass-reinforced
thermosetting plastics (GRP) pipes - Determination of the
creep factor under dry conditions
- DIN EN 1393 - Plastics piping systems - Glass-reinforced
thermosetting plastics (GRP) pipes; Determination of initial
longitudinal tensile properties
- DIN EN 1447 - Plastics piping systems - Glass-reinforced
thermosetting plastics (GRP) pipes - Determination of long-term
resistance to internal pressure
- DIN EN 1448 - Plastics piping systems - Glass-reinforced
thermosetting plastics (GRP) components - Test methods to
prove the design of rigid locked socket- and -spigot joints
with elastomeric seals
- DIN EN 1449 - Plastics piping systems - Glass-reinforced
thermosetting plastics (GRP) components - Test methods to
prove the design of a cemented socket- and -spigot joints
- DIN EN 1450 - Plastics piping systems - Glass-reinforced
thermosetting plastics (GRP) components - Test methods to
prove the design of bolted flange joints
ISO Standards
Fiberglass related standards from ISO
- International Organization for Standardization
- ISO 178 - Plastics - Determination of flexural
properties
- ISO 527-4 - Plastics - Determination of tensile
properties - Part 4: Test conditions for isotropic and orthotropic
fibre-reinforced plastic composites
- ISO 7370 - Glass fiber reinforced thermosetting
plastics (GRP) pipes and fittings; Nominal diameters, specified
diameters and standard lengths
- ISO 7510 - Plastics piping systems - Glass-reinforced
plastics (GRP) components - Determination of the amounts of
constituents using the gravimetric method
- ISO 7684 - Plastics piping systems - Glass-reinforced
thermosetting plastics (GRP) pipes - Determination of the
creep factor under dry conditions
- ISO 10466 - Plastics piping systems - Glass-reinforced
thermosetting plastics (GRP) pipes - Test method to prove
the resistance to initial ring deflection
- ISO 10928 - Plastics piping systems - Glass-reinforced
thermosetting plastics (GRP) pipes and fittings - Methods
for regression analysis and their use
- ISO/TR 10465-1 - Underground installation of
flexible glass-reinforced thermosetting resin (GRP) pipes;
part 1: installation procedures
- ISO/TR 10465-2 - Underground installation of
flexible glass-reinforced thermosetting resin (GRP) pipes
- Part 2: Comparison of static calculation methods
- ISO/TR 10465-3 - Underground installation of
flexible glass-reinforced thermosetting resin (GRP) pipes
- Part 3: Installation parameters and application limits
|
