|
codes
& standards
Back
to codes and standards index
ASTM International
- Volume 01.01 Steel - Piping, Tubing, Fittings
An overview of the ASTM Volume 01.01 standard
The ASTM International Volume 01.01, January 2002 Steel - Piping,
Tubing, Fittings - features standards for various types of steel
pipes specifying requirements for high-temperature services, ordinary
use, and special applications such as fire protection systems.
Specifications for steel tubes list
standard requirements for boiler and superheater tubes, general
service tubes, still tubes in refinery service, heat exchanger
and condenser tubes, mechanical tubing, and structural tubing.
Steel casting specifications call out the standard properties
for valves, flanges, fittings, and other pressure containing parts
for high-temperature and low-temperature services.
• A53/A53M-01 Standard Specification
for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and
Seamless
• ASTM A-53B This general service carbon steel pipe is electrical
resistance welded. This grade is typical Schedule 40 and 80 pipe.
It is well suited for fabrication, and may be used for pressure
vessels with pressure and temperature limitations.
Often used for oil, water, gas and
petroleum products.
• A105/A105M-01 Standard Specification
for Carbon Steel Forgings for Piping Applications
This specification covers forged carbon steel piping components
for ambient- and higher-temperature service in pressure systems.
Included are flanges, fittings, valves, and similar parts ordered
either to dimensions specified by the purchaser or to dimensional
standards such as the ASME and API specifications referenced in
Section.
• A106-99e1 Standard Specification
for Seamless Carbon Steel Pipe for High-Temperature Service
The specification covers seamless carbon steel pipe for high-temperature
service in NPS 1/8 to NPS 48 inclusive, with nominal (average)
wall thickness as given in ANSI B 36.10. It shall be permissible
to furnish pipe having other dimensions provided such pipe complies
with all other requirements of this specification. Pipe ordered
under this specification shall be suitable for bending, flanging,
and similar forming operations, and for welding.
• A134-96 Standard Specification
for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and
Over)
• A135-01 Standard Specification for Electric-Resistance-Welded
Steel Pipe
• A139-00 Standard Specification for Electric-Fusion (Arc)-Welded
Steel Pipe (NPS 4 and Over)
• A178/A178M-95(2000) Standard Specification for Electric-Resistance-Welded
Carbon Steel and Carbon-Manganese Steel Boiler and Superheater
Tubes
• A179/A179M-90a(1996)e1 Standard Specification for Seamless
Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
• A181/A181M-01 Standard Specification for Carbon Steel Forgings,
for General-Purpose Piping
• A182/A182M-01 Standard Specification for Forged or Rolled
Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts
for High-Temperature Service
• A192/A192M-91(1996)e1 Standard Specification for Seamless
Carbon Steel Boiler Tubes for High-Pressure Service
• A193/A193M-01a Standard Specification for Alloy-Steel and
Stainless Steel Bolting Materials for High-Temperature Service
• A194/A194M-01a Standard Specification for Carbon and Alloy
Steel Nuts for Bolts for High-Pressure or High-Temperature Service,
or Both
• A209/A209M-98 Standard Specification for Seamless Carbon-Molybdenum
Alloy-Steel Boiler and Superheater Tubes
• A210/A210M-96 Standard Specification for Seamless Medium-Carbon
Steel Boiler and Superheater Tubes
The specification covers minimum-wall-thickness, seamless medium-carbon
steel, boiler tubes and boiler flues, including safe ends, arch
and stay tubes, and superheater tubes.
• A213/A213M-01a Standard Specification
for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater,
and Heat-Exchanger Tubes
• A214/A214M-96 Standard Specification for Electric-Resistance-Welded
Carbon Steel Heat-Exchanger and Condenser Tubes
• A234/A234M-01 Standard Specification for Piping Fittings
of Wrought Carbon Steel and Alloy Steel for Moderate and High
Temperature Service
• A249/A249M-01 Standard Specification for Welded Austenitic
Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
• A250/A250M-95(2001) Standard Specification for Electric-Resistance-Welded
Ferritic Alloy-Steel Boiler and Superheater Tubes
• A252-98e1 Standard Specification for Welded and Seamless
Steel Pipe Piles
• A254-97 Standard Specification for Copper-Brazed Steel
Tubing
• A268/A268M-01 Standard Specification for Seamless and Welded
Ferritic and Martensitic Stainless Steel Tubing for General Service
• A269-01 Standard Specification for Seamless and Welded
Austenitic Stainless Steel Tubing for General Service
• A270-01 Standard Specification for Seamless and Welded
Austenitic Stainless Steel Sanitary Tubing
• A312/A312M-01 Standard Specification for Seamless and Welded
Austenitic Stainless Steel Pipes
• A320/A320M-01 Standard Specification for Alloy/Steel Bolting
Materials for Low-Temperature Service
• A333/A333M-99 Standard Specification for Seamless and Welded
Steel Pipe for Low-Temperature Service
• A334/A334M-99 Standard Specification for Seamless and Welded
Carbon and Alloy-Steel Tubes for Low-Temperature Service
The specification covers several grades of minimum-wall-thickness,
seamless and welded, carbon and alloy-steel tubes intended for
use at low temperatures. Some product sizes may not be available
under this specification because heavier wall thickness have an
adverse affect on low-temperature impact properties.
• A335/A335M-01 Standard
Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature
Service
• A350/A350M-00c Standard Specification for Carbon and Low-Alloy
Steel Forgings, Requiring Notch Toughness Testing for Piping Components
• A358/A358M-01 Standard Specification for Electric-Fusion-Welded
Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature
Service
• A369/A369M-01 Standard Specification for Carbon and Ferritic
Alloy Steel Forged and Bored Pipe for High-Temperature Service
• A376/A376M-01 Standard Specification for Seamless Austenitic
Steel Pipe for High-Temperature Central-Station Service
• A381-96 Standard Specification for Metal-Arc-Welded Steel
Pipe for Use With High-Pressure Transmission Systems
• A403/A403M-00b Standard Specification for Wrought Austenitic
Stainless Steel Piping Fittings
• A409/A409M-01 Standard Specification for Welded Large Diameter
Austenitic Steel Pipe for Corrosive or High-Temperature Service
• A420/A420M-01 Standard Specification for Piping Fittings
of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
• A423/A423M-95(2000) Standard Specification for Seamless
and Electric-Welded Low-Alloy Steel Tubes
• A426-92(1997) Standard Specification for Centrifugally
Cast Ferritic Alloy Steel Pipe for High-Temperature Service
• A437/A437M-01a Standard Specification for Alloy-Steel Turbine-Type
Bolting Material Specially Heat Treated for High-Temperature Service
• A450/A450M-96a(2001) Standard Specification for General
Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy
Steel Tubes
• A451-93(1997) Standard Specification for Centrifugally
Cast Austenitic Steel Pipe for High-Temperature Service
• A453/A453M-00e1 Standard Specification for High-Temperature
Bolting Materials, with Expansion Coefficients Comparable to Austenitic
Stainless Steels
• A498-98 Standard Specification for Seamless and Welded
Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger Tubes
with Integral Fins
• A500-01a Standard Specification for Cold-Formed Welded
and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
• A501-01 Standard Specification for Hot-Formed Welded and
Seamless Carbon Steel Structural Tubing
• A511-96 Standard Specification for Seamless Stainless Steel
Mechanical Tubing
• A512-96 Standard Specification for Cold-Drawn Buttweld
Carbon Steel Mechanical Tubing
• A513-00 Standard Specification for Electric-Resistance-Welded
Carbon and Alloy Steel Mechanical Tubing
• A519-96 Standard Specification for Seamless Carbon and
Alloy Steel Mechanical Tubing
• A522/A522M-01 Standard Specification for Forged or Rolled
8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts
for Low-Temperature Service
• A523-96 Standard Specification for Plain End Seamless and
Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type
Cable Circuits
• A524-96 Standard Specification for Seamless Carbon Steel
Pipe for Atmospheric and Lower Temperatures
• A530/A530M-99e1 Standard Specification for General Requirements
for Specialized Carbon and Alloy Steel Pipe
• A539-99 Standard Specification for Electric-Resistance-Welded
Coiled Steel Tubing for Gas and Fuel Oil Lines
• A540/A540M-00 Standard Specification for Alloy-Steel Bolting
Materials for Special Applications
• A554-98e1 Standard Specification for Welded Stainless Steel
Mechanical Tubing
• A556/A556M-96 Standard Specification for Seamless Cold-Drawn
Carbon Steel Feedwater Heater Tubes
• A587-96 Standard Specification for Electric-Resistance-Welded
Low-Carbon Steel Pipe for the Chemical Industry
• A589-96 Standard Specification for Seamless and Welded
Carbon Steel Water-Well Pipe
• A595-98 Standard Specification for Steel Tubes, Low-Carbon,
Tapered for Structural Use
• A608-91a(1998) Standard Specification for Centrifugally
Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application
at High Temperatures
• A618-01 Standard Specification for Hot-Formed Welded and
Seamless High-Strength Low-Alloy Structural Tubing
• A632-01 Standard Specification for Seamless and Welded
Austenitic Stainless Steel Tubing (Small-Diameter) for General
Service
• A660-96 Standard Specification for Centrifugally Cast Carbon
Steel Pipe for High-Temperature Service
• A671-96 Standard Specification for Electric-Fusion-Welded
Steel Pipe for Atmospheric and Lower Temperatures
• A672-96 Standard Specification for Electric-Fusion-Welded
Steel Pipe for High-Pressure Service at Moderate Temperatures
• A688/A688M-01a Standard Specification for Welded Austenitic
Stainless Steel Feedwater Heater Tubes
• A691-98 Standard Specification for Carbon and Alloy Steel
Pipe, Electric-Fusion-Welded for High-Pressure Service at High
Temperatures
• A694/A694M-00 Standard Specification for Carbon and Alloy
Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for
High-Pressure Transmission Service
• A707/A707M-00a Standard Specification for Forged Carbon
and Alloy Steel Flanges for Low-Temperature Service
• A714-99 Standard Specification for High-Strength Low-Alloy
Welded and Seamless Steel Pipe
• A727/A727M-00 Standard Specification for Carbon Steel Forgings
for Piping Components with Inherent Notch Toughness
• A733-01 Standard Specification for Welded and Seamless
Carbon Steel and Austenitic Stainless Steel Pipe Nipples
• A758/A758M-00 Standard Specification for Wrought-Carbon
Steel Butt-Welding Piping Fittings with Improved Notch Toughness
• A771/A771M-95(2001) Standard Specification for Seamless
Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled
Reactor Core Components
• A774/A774M-00 Standard Specification for As-Welded Wrought
Austenitic Stainless Steel Fittings for General Corrosive Service
at Low and Moderate Temperatures
• A778-01 Standard Specification for Welded, Unannealed Austenitic
Stainless Steel Tubular Products
• A787-01 Standard Specification for Electric-Resistance-Welded
Metallic-Coated Carbon Steel Mechanical Tubing
• A789/A789M-01a Standard Specification for Seamless and
Welded Ferritic/Austenitic Stainless Steel Tubing for General
Service
• A790/A790M-01 Standard Specification for Seamless and Welded
Ferritic/Austenitic Stainless Steel Pipe
• A795-00 Standard Specification for Black and Hot-Dipped
Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire
Protection Use
• A803/A803M-01 Standard Specification for Welded Ferritic
Stainless Steel Feedwater Heater Tubes
• A813/A813M-01 Standard Specification for Single- or Double-Welded
Austenitic Stainless Steel Pipe
• A814/A814M-01 Standard Specification for Cold-Worked Welded
Austenitic Stainless Steel Pipe
• A815/A815M-01a Standard Specification for Wrought Ferritic,
Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
• A822-90(2000) Standard Specification for Seamless Cold-Drawn
Carbon Steel Tubing for Hydraulic System Service
• A826/A826M-95(2001) Standard Specification for Seamless
Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid
Metal-Cooled Reactor Core Components
• A836/A836M-95b(2001) Standard Specification for Titanium-Stabilized
Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel
Service
• A847-99a Standard Specification for Cold-Formed Welded
and Seamless High Strength, Low Alloy Structural Tubing with Improved
Atmospheric Corrosion Resistance
• A851-96 Standard Specification for High-Frequency Induction
Welded, Unannealed, Austenitic Steel Condenser Tubes
• A858/A858M-00 Standard Specification for Heat-Treated Carbon
Steel Fittings for Low-Temperature and Corrosive Service
• A860/A860M-00 Standard Specification for Wrought High-Strength
Low-Alloy Steel Butt-Welding Fittings
• A865-97 Standard Specification for Threaded Couplings,
Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for
Use in Steel Pipe Joints
• A872-91(1997) Standard Specification for Centrifugally
Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
• A908-91(1998) Standard Specification for Stainless Steel
Needle Tubing
• A928/A928M-00 Standard Specification for Ferritic/Austenitic
(Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition
of Filler Metal
• A941-01 Terminology Relating to Steel, Stainless Steel,
Related Alloys, and Ferroalloys
• A943/A943M-01 Standard Specification for Spray-Formed Seamless
Austenitic Stainless Steel Pipes
• A949/A949M-01 Standard Specification for Spray-Formed Seamless
Ferritic/Austenitic Stainless Steel Pipe
• A953-96 Standard Specification for Austenitic Chromium-Nickel-Silicon
Alloy Steel Seamless and Welded Tubing
• A954-96 Standard Specification for Austenitic Chromium-Nickel-Silicon
Alloy Steel Seamless and Welded Pipe
• A959-00a Standard Guide for Specifying Harmonized Standard
Grade Compositions for Wrought Stainless Steels
• A960-00 Standard Specification for Common Requirements
for Wrought Steel Piping Fittings
• A961-01 Standard Specification for Common Requirements
for Steel Flanges, Forged Fittings, Valves, and Parts for Piping
Applications
• A962/A962M-01a Standard Specification for Common Requirements
for Steel Fasteners or Fastener Materials, or Both, Intended for
Use at Any Temperature from Cryogenic to the Creep Range
• A972/A972M-00 Standard Specification for Fusion Bonded
Epoxy-Coated Pipe Piles
• A984/A984M-00 Standard Specification for Steel Line Pipe,
Black, Plain-End, Electric-Resistance-Welded
• A988-98 Standard Specification for Hot Isostatically-Pressed
Stainless Steel Flanges, Fittings, Valves, and Parts for High
Temperature Service
• A989-98 Standard Specification for Hot Isostatically-Pressed
Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature
Service
• A994-98 Standard Guide for Editorial Procedures and Form
of Product Specifications for Steel, Stainless Steel, and Related
Alloys
• A999/A999M-01 Standard Specification for General Requirements
for Alloy and Stainless Steel Pipe
• A1005/A1005M-00e1 Standard Specification for Steel Line
Pipe, Black, Plain End, Longitudinal and Helical Seam, Double
Submerged-Arc Welded
• A1006/A1006M-00 Standard Specification for Steel Line Pipe,
Black, Plain End, Laser Beam Welded
• A1012-00 Standard Specification for Seamless and Welded
Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat
Exchanger Tubes With Integral Fins
• A1014-00 Standard Specification for Precipitation-Hardening
Bolting Material (UNS N07718) for High Temperature Service
• A1015-01 Standard Guide for Videoborescoping of Tubular
Products for Sanitary Applications
• A1016/A1016M-01 Standard Specification for General Requirements
for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes
• A1020/A1020M-01 Standard Specification for Steel Tubes,
Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater,
Heat Exchanger and Condenser Applications
• E527-83(1997)e1 Standard Practice for Numbering Metals
and Alloys (UNS)
|
