|
codes
& standards
Back
to codes and standards index
BSi - Pipe, Tube and Fittings Standards
and Specifications
British standards and specifications
for pipe, tube and fittings
Industrial pipe, tube and fittings
standards and specifications from the BSi - British Standards
Institute:
- BS 21, Publication date:1985-09-30
Specification for pipe threads for tubes and fittings where
pressure-tight joints are made on the threads (metric dimensions)
- BS 61, Publication date:1969-12-31
Specification for threads for light gauge copper tubes and
fittings
- BS 65, Publication date:1991-10-31
Specification for vitrified clay pipes, fittings and ducts,
also flexible mechanical joints for use solely with surface
water pipes and fittings
- BS 78-2, Publication date:1965-02-02
Specification for cast iron spigot and socket pipes (vertically
cast) and spigot and socket fittings - Fittings
- BS 143 and 1256, Publication date:2000-03-15
Threaded pipe fittings in malleable cast iron and cast copper
alloy
- BS 416-1, Publication date:1990-10-31
Discharge and ventilating pipes and fittings, sand-cast or
spun in cast iron - Specification for spigot and socket systems
- BS 437, Publication date:1978-10-31
Specification for cast iron spigot and socket drain pipes
and fittings
- BS 567, Publication date:1973-03-14
Specification for asbestos-cement flue pipes and fittings,
light quality
- BS 806:1998
Specification for design and construction of ferrous piping
installations for and in connection with land boilers
- BS 835, Publication date:1973-03-30
Specification for asbestos-cement flue pipes and fittings,
heavy quality
- BS 864-3, Publication date:1975-05-30
Capillary and compression tube fittings of copper and copper
alloy - Compression fittings for polyethylene pipes
- BS 949-3, Publication date:1993-03-15
Screwing taps - Specification for pipe thread taps
- BS 1113, Publication date:1999-11-15
Specification for design and manufacture of water-tube steam
generating plant (including superheaters, reheaters and steel
tube economizers)
- BS 1127-2, Publication date:1990-06-29
Screwing dies and dienuts - Specification for hand- and machine-operated
circular screwing dies for taper pipe threads; R Series
- BS 1127-3, Publication date:1990-06-29
Screwing dies and dienuts - Specification for hand- and machine-operated
circular screwing dies for parallel pipe threads; G series
- BS 1387, Publication date:1985-10-31
Specification for screwed and socketed steel tubes and tubulars
and for plain end steel tubes suitable for welding or for
screwing to BS 21 pipe threads
- BS 1471:1995
Specification for wrought aluminium and aluminum alloys for
general engineering purposes - drawn tube
- BS 1600, Publication date:1992-01-31
Specification for dimensions of steel pipe for the petroleum
industry
- BS 1640-1, Publication date:1962-12-12
Specification for steel butt-welding pipe fittings for the
petroleum industry - Wrought carbon and ferritic alloy steel
fittings
- BS 1640-2, Publication date:1962-12-12
Specification for steel butt-welding pipe fittings for the
petroleum industry - Wrought and cast austenitic chromium-nickel
steel fittings
- BS 1640-3, Publication date:1968-03-22
Specification for steel butt-welding pipe fittings for the
petroleum industry - Wrought carbon and ferritic alloy steel
fittings - Metric units
- BS 1640-4, Publication date:1968-03-21
Specification for steel butt-welding pipe fittings for the
petroleum industry - Wrought and cast austenitic chromium-nickel
steel fittings - Metric units
- BS 1740 P1:1990
Wrought steel pipe fittings (screwed BSP threads) - Part1.
Metric units
- BS 1965 P1:1983
Butt welding pipe fittings for pressure purposes - Part 1.
Carbon Steel
- BS 2051-1, Publication date:1973-10-20
Tube and pipe fittings for engineering purposes - Copper and
copper alloys capillary and compression tube fittings for
engineering purposes
- BS 2051-2, Publication date:1984-02-29
Tube and pipe fittings for engineering purposes - Specification
for olive type copper alloy compression tube fittings
- BS 2494:1997
Specification for elastomeric seals for joints in pipe work
and pipelines
- BS 2598-4, Publication date:1980-04-30
Glass plant, pipeline and fittings - Specification for glass
plant components
- BS 2779:1986
Pipe threads for tubes & fittings where pressure-tight
joints are not made on the threads (metric dimensions)
- BS 2782 P1 METH 121A-121C:1996
Methods of testing plastics - Part 1. Thermal properties -methods
121A to 121C. Determination of temperature of deflection under
load of plastics and ebonite
- BS 3074, Publication date:1990-03-30
Specification for nickel and nickel alloys: seamless tube
- BS 3506, Publication date:1969-09-30
Specification for unplasticized PVC pipe for industrial uses
- BS 3799, Publication date:1974-08-30
Specification for steel pipe fittings, screwed and socket-welding
for the petroleum industry
- BS 3867:1987
Method of specifying outside diameters and pressure ratings
for pipe of thermoplastics materials (inch series)
- BS 3958-4, Publication date:1982-11-30
Thermal insulating materials - Bonded preformed man-made mineral
fibre pipe sections
- BS 4300/10, Publication date:1969-12-31
Wrought aluminium and aluminium alloys for general engineering
purposes (supplementary series) - 5454 Drawn tube
- BS 4346-3, Publication date:1982-08-31
Joints and fittings for use with unplasticized PVC pressure
pipes - Specification for solvent cement
- BS 4514, Publication date:2001-07-15
Unplasticized PVC soil and ventilating pipes of 82.4 mm minimum
mean outside diameter, and fittings and accessories of 82.4
mm and of other sizes - Specification
- BS 4622, Publication date:1970-07-29
Specification for grey iron pipes and fittings
- BS 4625, Publication date:1970-07-31
Specification for prestressed concrete pressure pipes (including
fittings)
- BS 4660, Publication date:2000-01-15
Thermoplastics ancillary fittings of nominal sizes 110 and
160 for below ground gravity drainage and sewerage
- BS 4728:1971
Method for determination of the resistance to constant internal
pressure of thermoplastic pipe
- BS 4825-1, Publication date:1992-01-31
Stainless steel tubes and fittings for the food industry and
other hygienic applications - Specification for tubes
- BS 4825-2, Publication date:1992-01-31
Stainless steel tubes and fittings for the food industry and
other hygienic applications - Specification for bends and
tees
- BS 4825-3, Publication date:1992-01-31
Stainless steel tubes and fittings for the food industry and
other hygienic applications - Specification for clamp type
couplings
- BS 4825-4, Publication date:1992-01-31
Stainless steel tubes and fittings for the food industry and
other hygienic applications - Specification for threaded (IDF
type) coupling
- BS 4825-5, Publication date:1992-01-31
Stainless steel tubes and fittings for the food industry and
other hygienic applications - Specification for recessed ring
joint type couplings
- BS 4870 P3:1990
Arc welding of tube to tube-plate joints, metal
- BS 4871-3, Publication date:1985-03-29
Specification for approval testing of welders working to approved
welding procedures - Arc welding of tube to tube-plate joints
in metallic materials
- BS 4962, Publication date:1989-07-31
Specification for plastics pipes and fittings for use as subsoil
field drains
- BS 4991, Publication date:1974-03-29
Specification for propylene copolymer pressure pipe
- BS 5114, Publication date:1975-05-30
Specification for performance requirements for joints and
compression fittings for use with polyethylene pipes
- BS 5254:1983
Specification for polypropylene waste pipe and fittings (external
diameter 34.6 mm, 41.0 mm and 64.1 mm)
- BS 5255, Publication date:1989-09-29
Specification for thermoplastics waste pipe and fittings
- BS 5391-1, Publication date:1976-10-29
Specification for acrylonitrile-butadiene-styrene (ABS) pressure
pipe - Pipe for industrial uses
- BS 5392-1, Publication date:1976-10-29
Specification for acrylonitrile-butadiene-styrene (ABS) fittings
for use with ABS pressure pipe - Fittings for use with pipe
for industrial uses
- BS 5422, Publication date:2001-12-05
Method for specifying thermal insulating materials for pipes,
tanks, vessels, ductwork and equipment operating within the
temperature range -40 °C to +700 °C
- BS 5480, Publication date:1990-06-29
Specification for glass reinforced plastics (GRP) pipes, joints
and fittings for use for water supply or sewerage
- BS 5481:1983
Specification for unplasticized PVC pipe and fittings for
gravity sewer
- BS 5556:1986
Specification for general requirements for dimensions and
pressure ratings for pipe of thermoplastics materials (metric
series )
- BS 5608, Publication date:1993-11-15
Specification for preformed rigid polyurethane (PUR) and polyisocyanurate
(PIR) foams for thermal insulation of pipework and equipment
- BS 5627, Publication date:1984-01-31
Specification for plastics connectors for use with horizontal
outlet vitreous china WC pans
- BS 5911-1, Publication date:2002-11-18
Precast concrete pipes, fittings and ancillary products -
Specification for unreinforced and reinforced concrete pipes
(including jacking pipes) and fittings with flexible joints
(complementary to BS EN 1916:2002)
- BS 5911-3, Publication date:2002-11-18
Precast concrete pipes, fittings and ancillary products -
Specification for unreinforced and reinforced concrete manholes
and soakaways (complementary to BS EN 1917:2002)
- BS 5911-4, Publication date:2002-11-18
Precast concrete pipes, fittings and ancillary products -
Specification for unreinforced and reinforced concrete inspection
chambers (complementary to BS EN 1917:2002)
- BS 5911-5, Publication date:2004-09-01
Precast concrete pipes, fittings and ancillary products -
Specification for prestressed non-pressure pipes and fittings
with flexible joints
- BS 5911-110, Publication date:1992-11-15
Precast concrete pipes, fittings and ancillary products -
Specification for ogee pipes and fittings (including perforated)
- BS 5911-114, Publication date:1992-11-15
Precast concrete pipes, fittings and ancillary products -
Specification for porous pipes
- BS 5911-230, Publication date:1994-01-15
Precast concrete pipes, fittings and ancillary products -
Specification for road gullies and gully cover slabs
- BS 5955-6, Publication date:1980-11-28
Plastics pipework (thermoplastics materials) - Code of practice
for the installation of unplasticized PVC pipework for gravity
drains and sewers
- BS 5955-8, Publication date:2001-10-22
Plastics pipework (thermoplastics materials) - Specification
for the installation of thermoplastic pipes and associated
fittings for use in domestic hot and cold services and heating
systems in buildings
- BS 5970, Publication date:2001-12-21
Code of practice for thermal insulation of pipework and equipment
in the temperature range of -100 °C to +870 °C
- BS 6076, Publication date:1996-11-15
Specification for polymeric film for use as a protective sleeving
for buried iron pipes and fittings (for site and factory application)
- BS 6209, Publication date:1982-05-31
Specification for solvent cement for non-pressure thermoplastics
pipe systems
- BS 6281-3, Publication date:1982-11-30
Devices without moving parts for the prevention of contamination
of water by backflow - Specification for pipe interrupters
of nominal size up to and including DN 42
- BS 6362, Publication date:1990-06-29
Specification for stainless steel tubes suitable for screwing
in accordance with BS 21 'Pipe threads for tubes and fittings
where pressure-tight joints are made on the threads'
- BS 6464, Publication date:1984-09-28
Specification for reinforced plastics pipes, fittings and
joints for process plants
- BS 7159, Publication date:1989-10-31
Code of practice for design and construction of glass-reinforced
plastics (GRP) piping systems for individual plants or sites
- BS 7291-1, Publication date:2001-10-30
Thermoplastics pipes and associated fittings for hot and cold
water for domestic purposes and heating installations in buildings
- General requirements
- BS 7291-2, Publication date:2001-10-30
Thermoplastics pipes and associated fittings for hot and cold
water for domestic purposes and heating installations in buildings
- Specification for polybutylene (PB) pipes and associated
fittings
- BS 7291-3, Publication date:2001-10-30
Thermoplastics pipes and associated fittings for hot and cold
water for domestic purposes and heating installations in buildings
- Specification for cross-linked polyethylene (PE-X) pipes
and associated fittings
- BS 7291-4, Publication date:1990-05-31
Thermoplastics pipes and associated fittings for hot and cold
water for domestic purposes and heating installations in buildings
- Specification for chlorinated polyvinyl chloride (PVC-C)
pipes and associated fittings and solvent cement
- BS 7336:1990
Specification for polyethylene fusion fittings with integral
heating element(s) for use with polyethylene pipes for the
conveyance of gaseous fuels
- BS 7431, Publication date:1991-03-29
Method for assessing solar water heaters - Elastomeric materials
for absorbers, connecting pipes and fittings
- BS 7435-1, Publication date:1991-07-31
Fibre cement flue pipes, fittings and terminals - Specification
for light quality fibre cement flue pipes, fittings and terminals
- BS 7435-2, Publication date:1991-07-31
Fibre cement flue pipes, fittings and terminals - Specification
for heavy quality fibre cement flue pipes, fittings and terminals
- BS 7605-2:1992
Agricultural irrigation equipment - Part 2: specification
for emitting systems
- BS 7677, Publication date:1993-07-15
Recommendations for classification of imperfections in pipe
joint rings
- BS 7838, Publication date:1996-08-15
Specification for corrugated stainless steel semi-rigid pipe
and associated fittings for low-pressure gas pipework of up
to 28 mm
- BS 7892, Publication date:2000-10-15
Specification for seal coats on cement mortar lined ductile
iron pipes and fittings
- BS 8010-2.1, Publication date:1987-02-27
Code of practice for pipelines - Pipelines on land: design,
construction and installation - Ductile iron
- BS 8010-2.5, Publication date:1989-08-31
Code of practice for pipelines - Pipelines on land: design,
construction and installation - Glass reinforced thermosetting
plastics
-
- BS EN 253:2003
District heating pipes - preinsulated bonded pipe systems
for directly buried hot water networks - pipe assembly of
steel service pipe, polyurethane thermal insulation and outer
casing of polyethylene
- BS EN 295-1, Publication date:1991-10-31
Vitrified clay pipes and fittings and pipe joints for drains
and sewers - Requirements
- BS EN 295-2, Publication date:1991-10-31
Vitrified clay pipes and fittings and pipe joints for drains
and sewers - Quality control and sampling
- BS EN 295-3, Publication date:1991-10-31
Vitrified clay pipes and fittings and pipe joints for drains
and sewers - Test methods
- BS EN 295-4, Publication date:1995-09-15
Vitrified clay pipes and fittings and pipe joints for drains
and sewers - Requirements for special fittings, adaptors and
compatible accessories
- BS EN 295-5, Publication date:1994-08-15
Vitrified clay pipes and fittings and pipe joints for drains
and sewers - Requirements for perforated vitrified clay pipes
and fittings
- BS EN 295-6, Publication date:1996-04-15
Vitrified clay pipes and fittings and pipe joints for drains
and sewers - Requirements for vitrified clay manholes
- BS EN 295-7, Publication date:1996-04-15
Vitrified clay pipes and fittings and pipe joints for drains
and sewers - Requirements for vitrified clay pipes and joints
for pipe jacking
- BS EN 448:2003
District heating pipes - preinsulated bonded pipe systems
for directly buried hot water networks - fittings assemblies
of steel service pipes, polyurethane thermal insulation and
outer casing of polyethylene
- BS EN 476, Publication date:1998-01-15
General requirements for components used in discharge pipes,
drains and sewers for gravity systems
- BS EN 489, Publication date:2003-02-27
District heating pipes - Preinsulated bonded pipe systems
for directly buried hot water networks - Joint assembly for
steel service pipes, polyurethane thermal insulation and outer
casing of polyethylene
- BS EN 545, Publication date:2002-07-23
Ductile iron pipes, fittings, accessories and their joints
for water pipelines - Requirements and test methods
- BS EN 588-1, Publication date:1997-04-15
Fibre-cement pipes for sewers and drains - Pipes, joints and
fittings for gravity systems
- BS EN 598, Publication date:1995-01-15
Ductile iron pipes, fittings, accessories and their joints
for sewerage applications - Requirements and test methods
- BS EN 639, Publication date:1995-05-15
Common requirements for concrete pressure pipes including
joints and fittings
- BS EN 640, Publication date:1995-05-15
Reinforced concrete pressure pipes and distributed reinforcement
concrete pressure pipes (non-cylinder type), including joints
and fittings
- BS EN 641, Publication date:1995-05-15
Reinforced concrete pressure pipes, cylinder type, including
joints and fittings
- BS EN 642, Publication date:1995-06-15
Prestressed concrete pressure pipes, cylinder and non-cylinder,
including joints, fittings and specific requirement for prestressing
steel for pipes
- BS EN 681-1, Publication date:1996-11-15
Elastomeric seals - Material requirements for pipe joint seals
used in water and drainage applications - Vulcanized rubber
- BS EN 723, Publication date:1996-12-15
Copper and copper alloys - Combustion method for determination
of carbon on the inner surface of copper tubes or fittings
- BS EN 911, Publication date:1996-03-15
Plastics piping systems - Elastomeric sealing ring type joints
and mechanical joints for thermoplastics pressure piping -
Test method for leaktightness under external hydrostatic pressure
- BS EN 922, Publication date:1995-07-15
Plastics piping and ducting systems - Pipes and fittings of
unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation
for determination of the viscosity number and calculation
of the k-value
- BS EN 969, Publication date:1996-01-15
Specification for ductile iron pipes, fittings, accessories
and their joints for gas pipelines - Requirements and test
methods
- BS EN 1056, Publication date:1996-09-15
Plastics piping and ducting systems - Plastics pipes and fittings
- Method for exposure to direct (natural) weathering
- BS EN 1119, Publication date:1996-09-15
Plastics piping systems - Joints for glass-reinforced thermosetting
plastics (GRP) pipes and fittings - Test methods for leaktightness
and resistance to damage of flexible and reduced-articulation
joints
- BS EN 1120, Publication date:1996-09-15
Plastics piping systems - Glass-reinforced thermosetting plastics
(GRP) pipes and fittings - Determination of the resistance
to chemical attack from the inside of a section in a deflected
condition
- BS EN 1229, Publication date:1997-01-15
Plastics piping systems - Glass-reinforced thermosetting plastics
(GRP) pipes and fittings - Test methods to prove the leaktightness
of the wall under short-term internal pressure
- BS EN 1277, Publication date:2004-04-21
Plastics piping systems - Thermoplastics piping systems for
buried non-pressure applications - Test methods for leaktightness
of elastomeric sealing ring type joints
- BS EN 10232, Publication date:1994-05-15
Metallic materials - Tube (in full section) - Bend test
- BS EN 10233, Publication date:1994-05-15
Metallic materials - Tube - Flattening test
- BS EN 10234, Publication date:1994-05-15
Metallic materials - Tube - Drift expanding test
- BS EN 10242, Publication date:1995-09-15
Threaded pipe fittings in malleable cast iron
-
- BS EN ISO 8434-1, Publication date:1995-09-15
Metallic tube connections for fluid power and general use
- 24 ° compression fittings
- BS EN ISO 8434-4, Publication date:1997-01-15
Metallic tube connections for fluid power and general use
- 24 ° cone connectors with O-ring weld-on nipples
- BS EN ISO 8497, Publication date:1997-01-15
Thermal insulation - Determination of steady-state thermal
transmission properties of thermal insulation for circular
pipes
- BS EN ISO 9455-12, Publication date:1994-12-15
Soft soldering fluxes - Test methods - Steel tube corrosion
test
- BS EN ISO 11961, Publication date:1997-02-15
Petroleum and natural gas industries - Steel pipes for use
as drill pipe - Specification
- BS EN ISO 12185, Publication date:1996-09-15
Methods of test for petroleum and its products - Crude petroleum
and petroleum products - Determination of density - Oscillating
U-tube method
-
- BS ISO 8434-2, Publication date:1995-09-15
Metallic tube connections for fluid power and general use
- 37 ° flared fittings
- BS ISO 8434-3, Publication date:1995-09-15
Metallic tube connections for fluid power and general use
- O-ring face seal fittings
- BS ISO 10931-1, Publication date:1997-05-15
Plastics piping systems for industrial applications - Poly
(vinylidene fluoride) - General
- BS ISO 10931-2, Publication date:1997-05-15
Plastics piping systems for industrial applications - Poly
(vinylidene fluoride) - Pipes
- BS ISO 10931-3, Publication date:1997-05-15
Plastics piping systems for industrial applications - Poly
(vinylidene fluoride) - Fittings
-
- BS 4L 54:1996
Specification for tube of 99% aluminum (cold draw: seamless:
tested hydraulically) not exceeding 12 mm wall thickness)
- BS 3L 63:1996
Specification for tube of aluminum-copper-magnesium-silicon-manganese
alloy (solution treated and precipitation treated)
- BS L 105:1996
Specification for tube of aluminum-copper-magnesium-silicon-manganese
alloy (Solution treated and aged at room temperature) (not
exceeding 10 mm wall thickness)
- BS L 114, Publication date:1971-09-30
Specification for tube of aluminium-magnesium-silicon-manganese
alloy (solution treated and precipitation treated) (not exceeding
10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1,
Mn 0.7)
- BS 2L 116:1985
Specification for tube of 99% aluminium (cold drawn, seamless,
not tested hydraulically) (not exceeding 12 mm wall thickness)
- BS L 117, Publication date:1975-05-30
Specification for tube of aluminium-magnesium-silicon-copper-chromium
alloy (solution treated and artificially aged: not tested
hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si
0.6, Cu 0.28, Cr 0.2)
- BS L 118, Publication date:1975-05-30
Specification for tube of aluminium-magnesium-silicon-copper-chromium
alloy (solution treated and artificially aged: tested hydraulically)
(not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28,
Cr 0.2)
- BS 2L 503, Publication date:1973-03-15
Specification for tube of magnesium-6% aluminium-zinc alloy
(Al 6.0, Zn 1.0)
- BS 2L 509, Publication date:1973-03-15
Specification for tube of magnesium-1<1/4>% zinc-zirconium
alloy (suitable for welding by inert-gas shielded arc techniques)
(Zn 1.25, Zr 0.6)
- BS 5T 2, Publication date:1972-10-27
Specification for 4/1 nickel-chromium steel tube (1300 N/mmUP2)
- BS 4T 45, Publication date:1972-03-31
Specification for carbon-manganese steel tube (700 N/mmUP2)
(tube 12.5 mm outside diameter and greater) (weldable)
- BS 3T 53, Publication date:1980-02-29
Specification for chromium-molybdenum steel tube (700 MPa)
(outside diameter not less than 12.5 mm) (weldable)
- BS 2T 57, Publication date:1972-10-27
Specification for 4/1 nickel-chromium steel tube (1150 N/mmUP2)
- BS 3T 60, Publication date:1980-02-29
Specification for chromium-molybdenum steel tube (1150 MPa)
(maximum thickness 8 mm)
- BS T 64, Publication date:1972-03-31
Specification for carbon-manganese steel tube (550 N/mmUP2)
(tube less than 12.5 mm outside diameter) (weldable)
- BS 2T 66, Publication date:1980-02-29
Specification for 18/10 chromium-nickel corrosion-resisting
steel tube (niobium stabilized: 550 MPa) (weldable)
- BS T 67, Publication date:1972-10-27
Specification for 18/10 chromium-nickel corrosion-resisting
steel tube (titanium stabilized: 550 N/mmUP2) (weldable)
- BS 2T 68, Publication date:1980-02-29
Specification for cold drawn 18/10 chromium-nickel corrosion-resisting
steel tube (niobium stabilized: 800 MPa) (weldable)
- BS T 69, Publication date:1972-10-27
Specification for cold drawn 18/10 chromium-nickel corrosion-resisting
steel tube (titanium stabilized: 800 N/mmUP2) (weldable)
- BS T 72-T 73, Publication date:1977-05-31
Specifications for 18/10 chromium-nickel corrosion-resisting
steel tube for hydraulic purposes (niobium/titanium stabilized:
550 MPa)
- BS T 74, Publication date:1972-10-27
Specification for low carbon 18/10 chromium-nickel corrosion-resisting
steel tube (500 N/mmUP2)
- BS T 75, Publication date:1972-10-27
Specification for low carbon 17/12 chromium-nickel-molybdenum
corrosion-resisting steel tube (500 N/mmUP2)
- BS T 76, Publication date:1978-11-30
Specification for chromium-molybdenum steel tube (770 MPa)
(weldable)
- BS T 77, Publication date:1980-02-29
Specification for chromium-molybdenum steel tube (900 MPa)
(weldable)
|
