Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Removable spools for Air-cooler Inlet piping

Removable spools for Air-cooler Inlet piping 2 years 9 months ago #9152

  • MMC
  • MMC's Avatar
  • Offline
  • New Member
  • Posts: 13
  • Karma: 1
Thanks JoP.
On reflection I would say that the article does not specifically address removable spools and the examples of inlet and outlet piping maybe imply they are not necessary. However we would tend to have removable spools on inlet in order to allow the bundles to be removed if necessary as we typically have plug type header with inlet nozzles on top. For standard maintenance the tubes etc would be maintained in situ as per vendors instructions. I have attached page from installation manual for forced draft with inlet/outlet plug type on same side.
  • Page:
  • 1
  • 2
Moderators: Jop
Time to create page: 0.374 seconds



Latest Jobs Feed

Feed not found.

Company News Feeds

Company News Feeds

Login Form

You are not logged in.