- Posts: 7
- Thank you received: 0
Bolt Sizes for PN10 Flanges and anchor bolts
- mah_basha
- Topic Author
- Offline
- New Member
Less More
17 years 2 months ago - 17 years 2 months ago #8612 by mah_basha
Bolt Sizes for PN10 Flanges and anchor bolts was created by mah_basha
Dear Frineds
Can any body help me what are the galvanized iron bolt sizes to be used with PN 10 flanges. I have a pumping station for a raw sewage water treatment plant with PN10 valves and pipes. How much clearance should I use between bolts and flange holes. is 2 mm enough.
Does anyone have a chart for the anchor bolts sizes to concrete foundation, how much hole should I specify in the concrete base.
You quick reply will be highly appreciated
Regards
Basha
Can any body help me what are the galvanized iron bolt sizes to be used with PN 10 flanges. I have a pumping station for a raw sewage water treatment plant with PN10 valves and pipes. How much clearance should I use between bolts and flange holes. is 2 mm enough.
Does anyone have a chart for the anchor bolts sizes to concrete foundation, how much hole should I specify in the concrete base.
You quick reply will be highly appreciated
Regards
Basha
Please Log in or Create an account to join the conversation.
- Jop
- Offline
- Moderator
Less More
- Posts: 1053
- Thank you received: 14
17 years 1 month ago - 17 years 1 month ago #3934 by Jop
Do it once and Do it Right
Replied by Jop on topic Bolt sizes for flanges
These charts should help.
pipingdesigners.com/codes%20&%20 ... 0-%209.htm
www.worldwidemetric.com/PDFs/Fla ... IN2576.pdf
pipingdesigners.com/codes%20&%20 ... 0-%209.htm
www.worldwidemetric.com/PDFs/Fla ... IN2576.pdf
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
- rconner
- Offline
- New Member
Less More
- Posts: 5
- Thank you received: 0
17 years 1 month ago - 17 years 1 month ago #3955 by rconner
Replied by rconner on topic Ductile Iron PN Flange Data
fyi perhaps the data at www.acipco.com/international/pip ... nge/fd.cfm may be of some help to you (see also that English/inch equivalent bolting for use in PN flanges is also available in this reference, where tha tinformation might also be helkpful)
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.214 seconds