Piping STDs

  • nazimwildfire
  • nazimwildfire's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
16 years 9 months ago - 16 years 9 months ago #8684 by nazimwildfire
Piping STDs was created by nazimwildfire
Dear Sirs,
I am in Plant Design for 1.5 yrs
I have been in PDS ever since.
I want all of your help

The Stds like Asme, Astm, Api

can any one help me out the way we have to follow these, please give me examples.

Nazim.
Bechtel, Delhi.

Please Log in or Create an account to join the conversation.

More
16 years 9 months ago - 16 years 9 months ago #4062 by Jop
Replied by Jop on topic Help
Read everything there is on the "Training", "Tips" and "Standards" section of this web site. Also ask for a set of the "Bechtel Piping Standards" from your supervisor.

Do it once and Do it Right

Please Log in or Create an account to join the conversation.

  • nazimwildfire
  • nazimwildfire's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
16 years 9 months ago - 16 years 9 months ago #4064 by nazimwildfire
Replied by nazimwildfire on topic Thank you Sir
Mr.Jop,
I will go through all that you have mentioned and if I have any clarifications I shall call.

Nazim
Bechtel.

Please Log in or Create an account to join the conversation.

More
16 years 9 months ago - 16 years 9 months ago #4065 by ravi.shock
Replied by ravi.shock on topic ASME,API
well, you first need to look into the index sheets. You decide what information you need and then go to index sheet look for what you want and then goto that page.
There must have standards in your office intranet. you go through it.
Its very user friendly.

Please Log in or Create an account to join the conversation.

  • nazimwildfire
  • nazimwildfire's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
16 years 9 months ago - 16 years 9 months ago #4066 by nazimwildfire
Replied by nazimwildfire on topic Ravi
Ravi,

Thank you very much,

I will try using it.

Please Log in or Create an account to join the conversation.

More
16 years 1 month ago - 16 years 1 month ago #4522 by juan1977
Replied by juan1977 on topic Read everything there is on
Read everything there is on the "Training", "Tips" and "Standards" section of this web site. Also ask for a set of the "Bechtel Piping Standards" from your supervisor.

_____________

1. Reading everything ( i dont know how can anybody read everything) related to training, tips and Standards wont make you competent to handle the ASME and API requirements. These are Codes not Standards. Non-compliance to its mandatory requirement - well you pay big time.

2. You may not have access to Bechtel "Standard" ( i p refer the term engineering guide) unless you work for Bechtel or work for the owner in which Bechtel is the EPC. By the way Bechtel normally submit a complete package for piping spec as part of their deliverable . How good are they - theyre good and reliable, used it several times over.

Please Log in or Create an account to join the conversation.

Moderators: Jop
Time to create page: 0.275 seconds