- Posts: 44
- Thank you received: 0
1'' Line Tapping
- sabir
- Topic Author
- Offline
- Senior Member
Less More
16 years 1 month ago - 16 years 1 month ago #7296 by sabir
1'' Line Tapping was created by sabir
Gents…..
I guess someone can help me on this.
We have a 1'' line which carry HC gas
Material - Carbon Steel
Pressure - < 1 bar
We want to take a tapping point from this line. We cut the line using cold cutting. There is no immediate isolation point available near the tapping point.
I heard about some balloon type plug that can be fitted inside the pipe to get a positive isolation
My question is
1. Is it possible to do this on a 1'' line
2. What is the product name and the procedure to do this
3. Vendor details, if any.
Thank you in advance,
Regards,
Sabir
I guess someone can help me on this.
We have a 1'' line which carry HC gas
Material - Carbon Steel
Pressure - < 1 bar
We want to take a tapping point from this line. We cut the line using cold cutting. There is no immediate isolation point available near the tapping point.
I heard about some balloon type plug that can be fitted inside the pipe to get a positive isolation
My question is
1. Is it possible to do this on a 1'' line
2. What is the product name and the procedure to do this
3. Vendor details, if any.
Thank you in advance,
Regards,
Sabir
Please Log in or Create an account to join the conversation.
- Jop
- Offline
- Moderator
Less More
- Posts: 1053
- Thank you received: 14
15 years 10 months ago - 15 years 10 months ago #4690 by Jop
Do it once and Do it Right
Replied by Jop on topic Inflatable Pipe Plugs
The Inflatable Pipe Plugs do not seem to be available for 1". I did find them for 2" and larger sizes.
Look here:
www.permatyperubber.com/inflatab ... -plugs.htm
and here
webstore.petersenresources.com/i ... plugs.aspx
Check Google for more under "Inflatable Pipe Plugs"
Look here:
www.permatyperubber.com/inflatab ... -plugs.htm
and here
webstore.petersenresources.com/i ... plugs.aspx
Check Google for more under "Inflatable Pipe Plugs"
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.240 seconds