- Posts: 4
- Thank you received: 0
45 deg Branch connection for flare header
- sumeetd83
- Topic Author
- Offline
- New Member
Less More
13 years 11 months ago - 13 years 11 months ago #7820 by sumeetd83
45 deg Branch connection for flare header was created by sumeetd83
For Flare line at 3.5 kg/cm2 and 250 deg cel.Which type of 45 deg branch connection should be used ?
Latrolet or Y type fitting.Can one use stub connection
Latrolet or Y type fitting.Can one use stub connection
Please Log in or Create an account to join the conversation.
- Jop
- Offline
- Moderator
Less More
- Posts: 1053
- Thank you received: 14
13 years 11 months ago - 13 years 11 months ago #5629 by Jop
Do it once and Do it Right
Replied by Jop on topic Re: 45 deg Branch connection for flare header
Without you giving us specific sizes I assume you are asking a general question, so for a general answer I would say use the LatroLet.
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.222 seconds