- Posts: 30
- Thank you received: 0
Metallic flange to Non- mettalic pipe like FRP
- kumaraba
- Topic Author
- Offline
- Junior Member
Less More
12 years 1 month ago - 12 years 1 month ago #8190 by kumaraba
Metallic flange to Non- mettalic pipe like FRP was created by kumaraba
can we use mettalic flanges to the non metallic pipe connections especially in case of equipments nozzles when the equipment is FRP? Please recommend which is the best/ Either using non metallic flanges to non metallic pipes or metallic flanges?
Please Log in or Create an account to join the conversation.
- 11echo
- Offline
- Platinum Member
Less More
- Posts: 351
- Thank you received: 5
12 years 1 month ago - 12 years 1 month ago #6496 by 11echo
Replied by 11echo on topic Re: Metallic flange to Non- mettalic pipe like FRP
Well if you’re changing specs then there's no way around it. I've connected FRP flanges to steel flanges a number of times, only issue is the steel flange has to be flat faced and use an appropriate gasket! Also I suggest using steel washers on the studs, FRP side only.
Please Log in or Create an account to join the conversation.
- Jop
- Offline
- Moderator
Less More
- Posts: 1053
- Thank you received: 14
12 years 1 month ago - 12 years 1 month ago #6500 by Jop
Do it once and Do it Right
Replied by Jop on topic Re: Metallic flange to Non- mettalic pipe like FRP
11echo,
Good answer, I agree 100%
Jop
Good answer, I agree 100%
Jop
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.276 seconds