- Posts: 4
- Thank you received: 0
Reductions on ASME B16.5 and B16.11
- JuanVega
-
Topic Author - Offline
- New Member
-
Less More
14 years 3 weeks ago - 14 years 3 weeks ago #7799 by JuanVega
Reductions on ASME B16.5 and B16.11 was created by JuanVega
Hello
I would like to know if there are dimension tables for reducers (concentric and excentric) for ASME B16.5, or I have to use the reduction relations for flanges.
Also I would like to know about if there are any reduction fittings on B16.11, because the Standard talks about the method of designating outlets of reducing tees and crosses but inside the Standard i can't find a table about them. So my question is about which relations of reduction are there for these elements and which are the ones that the Standard contemplates (reducing cross on both outlets? all outlets are different?).
Thank you already for the help.
I would like to know if there are dimension tables for reducers (concentric and excentric) for ASME B16.5, or I have to use the reduction relations for flanges.
Also I would like to know about if there are any reduction fittings on B16.11, because the Standard talks about the method of designating outlets of reducing tees and crosses but inside the Standard i can't find a table about them. So my question is about which relations of reduction are there for these elements and which are the ones that the Standard contemplates (reducing cross on both outlets? all outlets are different?).
Thank you already for the help.
Please Log in or Create an account to join the conversation.
- Jop
-
- Offline
- Moderator
-
Less More
- Posts: 1053
- Thank you received: 14
14 years 2 weeks ago - 14 years 2 weeks ago #5654 by Jop
Do it once and Do it Right
Replied by Jop on topic Re: Reductions on ASME B16.5 and B16.11
I don't understand the need for your question.
A link like this:
sketchup.engineeringtoolbox.com/ ... c_107.html
and this
"www.weldbend.com/Fittings/fittingsindex.htm"
should give you all you need
A link like this:
sketchup.engineeringtoolbox.com/ ... c_107.html
and this
"www.weldbend.com/Fittings/fittingsindex.htm"
should give you all you need
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
- vijay.patre09
-
- Offline
- New Member
-
Less More
- Posts: 2
- Thank you received: 0
13 years 3 months ago - 13 years 3 months ago #5933 by vijay.patre09
Replied by vijay.patre09 on topic Re: Reductions on ASME B16.5 and B16.11
Please Refer ASME B 16.9 ( standard for Seamless fitting) i am sure you will get the information what you want.
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.181 seconds
%20for%20ASME%20B16.5,%20or%20I%20have%20to%20use%20the%20reduction%20relations%20for...&caption=pipingdesigners.com){kind=link}
