Can IS-3589 be used for 3750 mm Inner dia pipe manufacturing

  • harshalpbhanej
  • harshalpbhanej's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
12 years 6 months ago - 12 years 6 months ago #8111 by harshalpbhanej
Query : Can IS-3589 be used for 3750 mm Inner dia pipe manufacturing.
Plate material : IS 2062 GR BR/ B0 PLATE (20 mm thick)

As written in IS 3589 page-1.
"This standard applies to seamless and welded carbon steel pipes for water and sewage of
outside diameter from 168.3 to 2540 mm."

As written in IS 3589 page-6.
"12.3.3 Ovality
12.3.3.1 Ovality shall not exceed 1 percent of the specified outside diameter for pipes having
diameter to thickness ratio not exceeding 100.Where the diameter to thickness ratio exceeds 100 the tolerance on ovality is not specified and should be agreed between the manufacturer
and the purchaser."

Right now we are going ahead with the ovality point and found out thickness required by calculations. thickness 20 mm. Are we proceding on the right path?

Please Log in or Create an account to join the conversation.

Moderators: Jop
Time to create page: 0.211 seconds