- Posts: 3
- Thank you received: 0
Remove Isogen Dimensions for Couplings and Unions
- DragonServ
- Topic Author
- Offline
- New Member
Less More
9 years 8 months ago - 9 years 6 months ago #8554 by DragonServ
Remove Isogen Dimensions for Couplings and Unions was created by DragonServ
Hello all
I am fairly new to setting up isogen, and have been using Pipman 2010 to set it up. We are getting these Dims on the unions and couplings and a few tees that print out much lighter then the Dims that come in on a Iso plane. Is there a way to turn just these Dims off?
Attached is a copy of one of the iso's. When opened take a look at the "54" on the bottom right corner compared to the "156" that's on the DIM line near it.
Thanks
I am fairly new to setting up isogen, and have been using Pipman 2010 to set it up. We are getting these Dims on the unions and couplings and a few tees that print out much lighter then the Dims that come in on a Iso plane. Is there a way to turn just these Dims off?
Attached is a copy of one of the iso's. When opened take a look at the "54" on the bottom right corner compared to the "156" that's on the DIM line near it.
Thanks
Last edit: 9 years 6 months ago by Anton.
Please Log in or Create an account to join the conversation.
Time to create page: 0.222 seconds