PipingDesigners Community

A place for piping designers, engineers and industry professionals to ask questions, share experience, discuss technical topics and connect with other professionals.

Browse the discussions below or start a new topic. Please keep discussions practical, professional and relevant to the piping and engineering community.

Branch connections ...
 
Notifications
Clear all

Branch connections not showing in isometrics

2 Posts
2 Users
0 Reactions
63 Views
(@piper1978)
Active Member
Joined: 12 years ago
Posts: 2
Topic starter   [#933]

Hi all!
1. I use Cadworx 2013 R2 and when I extract isometrics branch connections are not shown but only in material take off box. Does anyone knows how to show the description of the B.C. with an arrow?
I tried to find it through Project Manager application (Cadworx application) and edit the option file but I couldnt!

2. How can I insert orifice flanges?

Thanks!



   
Quote
(@shayzee)
New Member
Joined: 11 years ago
Posts: 3
 

Hi,
This is down to how the
component is set up in your library parts. It all comes from here if set up correct with the piping rules set up etc.
See attached iso generated in Cadworx of what you are after. Unfortunately you will just need to draw an arrow with the description manually until you get your library component set up correct. The same applies with the orifice flange.

Attachments:
  • branchconnection.JPG


   
ReplyQuote
Share: