Written by {loadposition ArticleTop}
DIN – Pipe, Tube and Fittings Standards and Specifications
Deutsches Institut für Normung – DIN – pipe, tube and fittings standards and specifications Industrial pipe, tube and fittings standards and specifications from the DIN – Deutsches Institut für Normung:
DIN 76-2:1984 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
DIN EN 259-1:2001 Wall coverings in roll form – Heavy duty wallcoverings – Part 1: Specifications;
DIN EN 259-2:2001 Wall coverings in roll form – Heavy duty wallcoverings – Part 2: Determination of impact resistance;
DIN 431:2000 Pipe nuts with thread according to DIN ISO 228-1
DIN 906:1992 Hexagon socket pipe plugs
DIN 909:1992 Hexagon head pipe plugs
DIN 1230-P1:1992 Vitrified clay for sewerage; special fittings and adapters with flexible mechanical joint and compatible accessories; dimensions
DIN 1389:2001 WC connectors – Requirements and testing
DIN 1478:1975 Turnbuckles Made from Steel Tube or Round Steel Bar
DIN 1986-4:2003 Drainage systems on private ground – Part 4: Fields of application of sewage pipes and fittings of different materials
DIN 1988-3 Beiblatt 1:1988 Codes of practice for drinking water installations (TRWI); examples for calculation; DVGW code of practice
DIN 2406:1968 Pipelines symbols – pipe classes
DIN 2559-2:1984 Edge preparation for welding; matching of inside diameter for circumferential welds on seamless pipes
DIN 2559-3:1990 Preparation of welds; matching of inside diameters for circumferential welds on welded pipes
DIN 2559-4:1994 Preparation of welds; part 4: matching of inside diameters for circumferential welds on seamless pipes of stainless steels
DIN 2609:1991 Steel butt-welding pipe fittings; technical delivery conditions
DIN 2614:1990 Cement mortar linings for ductile iron and steel pipes and fittings; application, requirements and testing
DIN 2615-1:1992 Steel butt-welding pipes fittings; tees with reduced pressure factor
DIN 2615-2:1992 Steel butt-welding pipe fittings; tees for use at full service pressure
DIN 2616-1:1991 Steel butt-welding pipe fittings; eccentric reducers with reduced pressure factor DIN 2616-2:1991 Steel butt-welding pipe fittings; reducers for use at full service pressure
DIN 2617:1991 Steel butt-welding pipe fittings; caps
DIN 2618:1968 Butt welding steel fittings; welding saddles, nominal pressure
DIN 2619:1968 Butt welding steel fitting; bends for welding, nominal pressure 16
DIN 2826:1994 Hose fittings with clamp unit for steam and hot water, DN 15 up to DN 50, up to 18 bar
DIN 2848:2002 Flanged steel pipes and flanged steel or cast iron fittings with lining – PN 10, PN 25 and PN 40
DIN 2856:1986 Capillary solder fittings; assembly dimensions and testing
DIN 2873:2002 Flanged fitting pipes and flanged steel glass lined – PN 10 and PN 25
DIN 2874:2002 Steel flanged pipes and steel and cast iron flanged fittings lined with PTFE or PFA – Technical specifications
DIN 2875:2002 Flanged steel pipes and flanged steel fittings with hard or soft rubber lining – Technical specifications
DIN 2876:2002 Flanged steel pipes and flanged steel fittings glass lined – Technical specifications
DIN 2950:1983 Malleable cast iron fittings
DIN 2980:1977 Screwed steel pipe fittings
DIN 2981:1982 Threaded steel pipe fitting; fittings with long screw thread
DIN 2982:1977 Screwed steel pipe fitting; parallel nipples, taper nipples
DIN 2983:1977 Screwed steel pipe fittings, bends
DIN 2986:1977 Threaded steel pipe fittings; sockets
DIN 2987-P1:1977 Threaded steel pipe fittings crosses, tees, elbows
DIN 2987-P2:1977 Threaded steel pipe fittings reducing tees and elbows
DIN 2988:1977 Reducing sockets; threaded steel pipe fittings
DIN 2990:1977 Threaded steel pipe fitting; hexagon nipple; bushings DIN 2991:1977 Threaded steel pipe sitting; plugs, caps
DIN 2993:1977 Threaded steel pipe fittings; pipe unions
DIN 2999-2:1973 Whitworth Pipe Threads for Tubes and Fittings; Cylindrical Internal Thread and Conical External Thread, Gauging System and Use of Gauges
DIN 2999-3:1973 Whitworth Pipe Threads for Tubes and Fittings; Gauge Dimensions
DIN 2999-4:1986 Pipe threads for tubes and fittings; sizes for taper screw limit plug gauges for parallel internal thread
DIN 2999-5:1973 Whitworth Pipe Threads for Tubes and Fittings; Cylindrical Screw Limit Ring Gauges for Gauging Conical External Threads, Sizes
DIN 2999-6:1975 Whitworth Pipe Threads for Tubes and Fittings; Conical Screw Check Plugs, Sizes
DIN 3567:1963 Pipe Brackets for NW 20 to 500
DIN 3568:1977 Clamping plates for the suspension of pipes on I and IP steel beams
DIN 3570:1968 Steel Strap for Tubes of NW 20 to 500
DIN 3575:1962 Hanger straps with welding end for pipe hanging
DIN 3853:2001 Non-soldering and soldering compression fittings – Stud ends for use with union nut; Design sheet
DIN 3858:1988 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions
DIN 3861:2002 Non-soldering compression fittings – Compression rings – Design DIN 3867:2003 Non-soldering compression couplings – Pressure bush for butt joints
DIN 3870:2001 Non-soldering and soldering compression fittings – Union nuts series LL
DIN 3871:1995 Non-soldering and soldering compression couplings – Socket unions
DIN 3872:2003 Non-soldering compression couplings – Union nuts for butt joints
DIN 3904:1987 Olive type compression couplings; male stud elbows
DIN 3907:1987 Olive type compression couplings; male stud tees (stud branch)
DIN 3908:1984 Solderless compression couplings with olive equal
DIN 3911:1984 Solderless compression couplings with olive elbow
DIN 3914:1987 Olive type compression couplings; male stud tees (stud run)
DIN 3942:2002 Non-soldered compression fittings – Swivel elbows with 24° cone connectors with O-ring – Adjustable, for design and type of compression end according to DIN EN ISO 8434-1
DIN 3943:2002 Non-soldered compression fittings – Swivel branch tees with 24° cone connectors with O-ring – Adjustable, for design and type of compression end according to DIN EN ISO 8434-1
DIN 3944:2002 Non-soldered compression fittings – L-adaptors with 24° cone connectors and O-ring – Adjustable, for design and type of compression end according to DIN EN ISO 8434-1
DIN 3945:2002 Non-soldered compression fittings – Straight stud swivel adaptor with 24° cone connectors with O-ring – For design and type of compression end according to DIN EN ISO 8434-1
DIN 3952:1984 Solderless compression couplings with olive male, stud elbow assemblies
DIN 3953:1984 Solderless compression couplings with olive male, stud tee ( stud branch) assemblies
DIN 3954:1984 Solderless compression couplings with olive male, stud tee (stud run) assemblies
DIN 4032:1981 Concrete pipes and fitting; dimensions, technical conditions of delivery
DIN 4060:1998 Joints of sewer and drain pipes with elastomeric seals – Requirements and testing on joints with elastomeric seals
DIN 4922-2:1981 Steel Filter Pipes for Drilled Wells with Screwed Connection DN 100 to DN 500
DIN 4941:1965 Screw threads for drill pipes for seamless drill pipes for water and rock drillings according to the percussion drilling and core drilling method
DIN 7340:1993 Tubular rivets cut from the tube
DIN 7591:1981 Water fittings for domestic installation; Screwed unions with flat gasket for hose connection on either side, designed for nominal pressure 10
DIN 7593:1981 Water fittings for domestic installation; Screwed unions with gasket for connection to copper tube on either side, designed for nominal pressure 10
DIN 7632:1985 Compression couplings with spherical liner; reducers
DIN 7639:1985 Compression couplings with spherical liner; equal tees
DIN 8063-1:1986 Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of socket bends
DIN 8063-2:1980 Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Bends Made by Injection Moulding for Bonding; Dimensions
DIN 8063-3:2002 Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure – Part 3: Unions; Dimensions
DIN 8063-4:1983 Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (PVC-U) pressure pipes; bushings, flanges, seals; dimensions
DIN 8063-5:1999 Pipe joints components of unplasticized poly(vinyl chloride) (PVC-U) for pipes under pressure – Part 5: General quality requirements, testing
DIN 8063-6:2002 Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure – Part 6: Injection-moulded elbows for solvent cementing; Dimensions
DIN 8063-7:1980 Pipe joints and their elements of unplasticized polyvinylchloride (unplasticized PVC) under pressure; tees and branches of injection moulded for cold welding, dimensions
DIN 8063-8:2002 Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure – Part 8: Injection-moulded sockets, caps and nipples for solvent cementing; Dimensions
DIN 8063-9:1980 Pipe joints and their elements for pipes of unplasticized polyvinylchloride (unplasticized PVC) under pressure; sockets reducing of injection moulded for cold welding, dimensions
DIN 8063-10:2002 Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure – Part 10: Wall bracket elbows; Dimensions
DIN 8063-11:1980 Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Sockets with Primary Element of Copper-Zinc-Alloy (Brass) for Bonding; Dimensions
DIN 8063-12:1987 Pipe joint assemblies and fittings of unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of flanged and socket fittings
DIN 8975-P9:1983 Refrigeration plants; safety principles for design, equipment and installation, flexible pipe elements in the refrigerant circuit
DIN 8076-1:1984 Thermoplastics pressure pipelines; metal compression fittings for polyethylene (PE) pipes; general quality requirements; testing
DIN 8076-3:1994 Pressure pipelines made from thermoplastics materials – Part 3: Plastic joints for PE pipes; general quality requirements, testing
DIN 8906:1990 PN 40 flared flange solderless compression couplings for use in refrigerating systems
DIN 8912:1990 Coupling nuts and screwed plugs for use with PN 40 flared flange solderless compression couplings in refrigerating systems DIN 8914:1990 90° tapered seal rings and caps for use with PN 40 flared flange solderless compression couplings in refrigerating systems DIN 16450:1994 Socket-fittings for pressure piping of unplasticized polyvinylchloride (PVC-U); symbols
DIN 16451-P1:1994 Ductile iron (GGG) fittings for use with unplasticized polyvinyl chloride (PVC-U) pressure pipes – technical delivery conditions
DIN 16867:1982 Glass fibre reinforced polyester resin (UP-GF) pipes, fittings and joints for use in chemical pipelines; Technical delivery conditions
DIN 16961-1:2000 Pipes and fittings of thermoplastic materials with profiled wall and smooth pipe inside – Part 1: Dimensions
DIN 16961-2:2000 Pipes and fittings of thermoplastics materials with profiled wall and smooth pipe inside – Part 2: Technical delivery specifications
DIN 16967-2:1982 Glass fibre reinforced epoxy resin (EP-GF) pipe fittings and joints; Elbows, Tees, Dimensions
DIN 16928:1979 Pipes of Thermoplastic Materials; Pipe Joints, Elements for Pipes, Laying; General Directions
DIN 16962-1:1980 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends of Segmental Construction for Butt-welding, Dimensions
DIN 16962-2:1983 Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions
DIN 16962-3:1980 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends Formed from Pipe for Butt-welding, Dimensions
DIN 16962-4:1988 Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions
DIN 16962-5:2000 Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 – Part 5: General quality requirements, testing
DIN 16962-6:1980 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions
DIN 16962-7:1980 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions
DIN 16962-8:1980 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions
DIN 16962-9:1983 Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions
DIN 16962-10:1989 Pipe joint assemblies and fittings for types 1 to 3 polypropylene (PP) pressure pipes; injection-moulded fittings for butt welding; dimensions
DIN 16962-11:1980 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding,
DIN 16962-12:1999 Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 – Part 12: Flange adapters, flanges, sealing rings for socket welding; dimensions
DIN 16962-13:1987 Pipe joint assemblies and fittings for type 1 and type 2 polypropylene (PP) pressure pipes; pipe couplings; dimensions
DIN 16963-1:1980 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends of Segmental Construction for Butt-welding, Dimensions
DIN 16963-2:1983 Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions
DIN 16963-3:1980 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends for Butt-welding, Dimensions
DIN 16963-4:1988 Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions
DIN 16963-5:1999 Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 – Part 5: General quality requirements, testing
DIN 16963-6:1989 Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; injection-moulded fittings for butt welding; dimensions
DIN 16963-7:1989 Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; fittings for resistance welding; dimensions
DIN 16963-8:1980 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions
DIN 16963-9:1980 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions
DIN 16963-10:1980 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions
DIN 16963-11:1999 Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 – Part 11: Flange adapters, flanges, sealing rings for socket welding; dimensions
DIN 16963-13:1980 Pipe Joints and Elements for High Pressure Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions
DIN 16963-14:1983 Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions
DIN 16963-15:1987 Pipe joint assemblies and fittings for high-density polyethylene (HDPE) pressure pipes; pipe couplings; dimensions
DIN 16966-1:1988 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; fittings; general quality requirements and testing
DIN 16966-2:1982 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Elbows, Dimensions
DIN 16966-4:1982 Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions
DIN 16966-5:1982 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions
DIN 16966-6:1982 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; collars, flanges, joint rings, dimensions
DIN 16966-7:1995 Pipe joints and their elements of glass fibre reinforced polyester resins – Part 7: Bushings, flanges, flanged and butt joints; general quality requirements and test methods
DIN 16966-8:1982 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Laminated joints; Dimensions
DIN 16970:1970 Adhesives for Bonding Pipes and Pipe System Elements of Rigid PVC; General Quality Requirements and Testings
DIN 19522:2000 Cast iron drainage pipes and fittings without sockets (SML)
DIN 19530-P1:1983 Steel socket pipes and fittings for sewers; dimensions DIN 19530-P2:1983 Steel socket pipes and fittings for sewers; technical delivery conditions
DIN 19531-10:1999 Pipes and fittings made of unplasticized polyvinyl chloride (PVC-U) socket for waste and soil discharge systems inside buildings – Part 10: Fire behaviour, quality control and installation recommendations
DIN 19532:1979 Pipelines of unplasticized plyvinyl chloride (rigid PVS, PVC-U) for drinking water supply; pipes, pipe joints, pipeline parts
DIN 19535-10:2000 High-density polyethylene (PE-HD) pipes and fittings for hot-water resistant waste and soil discharge systems (HT) inside buildings – Part 10: Fire behaviour, quality control and installation recommendations
DIN 19537-1:1983 High density polyethylene (HDPE) pipes and fittings for drains and sewers; dimensions
DIN 19537-2:1988 High-density polyethylene (HDPE) pipes and fittings for drains and sewers; technical delivery conditions
DIN 19538-10:1999 Pipes and fittings made of chlorinated polyvinyl chloride (PVC-C) for hot-water resistant waste and soil discharge systems inside buildings – Part 10: Fire behaviour, quality control and installation recommendations
DIN 19559-1:1983 Measurement of flow of waste water in open channels and gravity conduits; general information
DIN 19565-1:1989 Centrifugally cast and filled polyester resin glass fibre reinforced (UP-GF) pipes and fittings for buried drains and sewers; dimensions and technical delivery conditions
DIN 19800-P1:1973 Asbestos cement pipes and fittings for pressure pipelines; pipes, dimensions
DIN 19850-1:1996 Fibre cement pipes and fittings for sewers – Part 1: Dimensions of pipes, branches and bends DIN 19850-2:1996Fibre cement pipes and fittings for sewers – Part 2: Dimensions of joints
DIN 24147 P1:1998 Fittings for use in air distribution systems; overview and dimensions
DIN 28065:1993 Glass lined apparatus and pipe equipment; thermal shock resistance
DIN 28187:1991 Tubular heat exchangers; connections tube to tube sheet DIN 28600:1983 Ductile iron pressure pipes & fittings for Gas and Water pipelines
DIN 28603:2002 Ductile iron pipes and fittings – Push-in joints – Survey, sockets and gaskets
DIN 28624:1990 Ductile iron collars for use with gas and water pipes dimensions and mass
DIN 28631:1996 Ductile iron castings for gas and water pressure pipelines; MI-fittings, socketed spigots with plane end branch; application dimensions and masses
DIN 28633:1996 Ductile iron castings for gas and water pressure pipelines; IT-fitting; all plane end tees; application, dimensions and masses
DIN 28645:1990 Ductile iron double-flanged tapers for use with gas and water pipes dimensions and mass
DIN 30670:1991 Polyethylen coatings of steel pipes and fittings – Requirements and testing
DIN 52613:1977 Thermal Insulation Testings; Determination of Thermal Conductivity by the Tube Method
DIN 53769-1:1988 Testing of glass fibre reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings
DIN 53769-2:1986 Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test
DIN 53769-3:1988 Testing of glass fibre reinforced plastics pipes; determination of initial and long-term ring stiffness
DIN 53769-6:1989 Testing of glass fibre reinforced plastics pipes; Testing of pipes and fittings under pulsating internal pressure
DIN 86041-1:1996 Welding Flanges – Part 1: Tanks and sea boxes, nominal pressure 10 and 16
DIN 86041-2:1996 Welding flanges – Part 2: Outboard connections, nominal pressure 10, 16, 40
DIN 86086:1996 Fittings for butt welding into copper-nickel-alloy pipelines – Technical specifications
DIN 86288:1989 Pipework on ships and marine structures; socketed steel pipes and fittings; fittings for use in shipbuilding
DIN EN 253:2003 District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene;
DIN EN 295-1:1999 Vitrified clay pipes and fittings and pipe joints for drains and sewers – Part 1: Requirements
DIN EN 295-2:1999 Vitrified clay pipes and fittings and pipe joints for drains and sewers – Part 2: Quality control and sampling
DIN EN 295-3:1999 Vitrified clay pipes and fittings and pipe joints for drains and sewers – Part 3: Test methods
DIN EN 295-4:1995 Vitrified clay pipes and fittings and pipe joints for drains and sewers – Part 4: Requirements for special fittings, adapters and compatible accessories
DIN EN 295-5:1999 Vitrified clay pipes and fittings and pipe joints for drains and sewers – Part 5: Requirements for perforated vitrified clay pipes and fittings
DIN EN 295-6:1995 Vitrified clay pipes and fittings and pipe joints for drains and sewers – Part 6: Requirements for vitrified clay manholes
DIN EN 295-7:1995 Vitrified clay pipes and fittings and pipe joints for drains and sewers – Part 7: Requirements for vitrified clay pipes and joints for pipe jacking
DIN EN 448:2003 District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
DIN EN 476:1997 General requirements for components used in discharge pipes, drains and sewers for gravity systems;
DIN EN 489:2003 District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene;
DIN EN 545:2002 Ductile iron pipes, fittings, accessories and their joints for water pipelines – Requirements and test methods;
DIN EN 578:1993 Plastics piping systems; plastics pipes and fittings; determination of the opacity
DIN EN 588-1:1996 Fibre-cement pipes for sewers and drains – Part 1: Pipes, joints and fittings for gravity systems;
DIN EN 588-2:2002 Fibre cement pipes for drains and sewers – Part 2: Manholes and inspection chambers
DIN EN 598:1994 Ductile iron pipes, fittings, accessories and their joints for sewerage application – Requirements and test methods
DIN EN 607:2004 Eaves gutters and fittings made of PVC-U – Definitions, requirements and testing;
DIN EN 639:1994 Common requirements for concrete pressure pipes, including joints and fittings;
DIN EN 640:1994 Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
DIN EN 641:1994 Reinforced concrete pressure pipes, cylinder type, including joints and fittings
DIN EN 642:1994 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
DIN EN 681-1:2003 Elastomeric seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 1: Vulcanized rubber;
DIN EN 705:1994 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes and fittings – Methods for regression analyses and their use
DIN EN 713:1994 Plastics piping systems; mechanical joints between fittings and polyolefin pressure pipes; test method for leaktightness under internal pressure of assemblies subjected to bending
DIN EN 714:1994 Thermoplastics piping systems – Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings – Test method for leaktightness under internal hydrostatic pressure whithout end thrust
DIN EN 715:1994 Thermoplastics piping systems; end-load bearing joints between small diameter pressure pipes and fittings; test method for leaktightness under internal water pressure, including end thrust
DIN EN 723:1996 Copper and copper alloys – Combustion method for determination of carbon on the inner surface of copper tubes or fittings;
DIN EN 727:1995 Plastics piping and ducting systems – Thermoplastics pipes and fittings – Determination of Vicat softening temperature (VST);
DIN EN 728:1997 Plastics piping and ducting systems – Polyolefin pipes and fittings – Determination of oxidation induction time
DIN EN 754-1:1997 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 1: Technical conditions for inspection and delivery;
DIN EN 754-2:1997 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 2: Mechanical properties;
DIN EN 754-3:1996 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 3: Round bars, tolerances on dimensions and form;
DIN EN 754-4:1996 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 4: Square bars, tolerances on dimensions and form;
DIN EN 754-5:1996 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 5: Rectangular bars, tolerances on dimensions and form;
DIN EN 754-6:1996 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 6: Hexagonal bars; tolerances on dimensions and form;
DIN EN 754-7:1998 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 7: Seamless tubes, tolerances on dimensions and form;
DIN EN 754-8:1998 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 8: Porthole tubes, tolerances on dimensions and form;
DIN EN 755-1:1997 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 1: Technical conditions for inspection and delivery
DIN EN 755-2:1997 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 2: Mechanical properties;
DIN EN 755-3:1995 Aluminium and aluminium alloys – Extruded rod/bar, tube and profile – Part 3: Round bars; tolerances on dimensions and form;
DIN EN 755-4:1995 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 4: Square bars, tolerances on dimensions and form;
DIN EN 755-5:1995 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 5: Rectangular bars, tolerances on dimensions and form;
DIN EN 755-6:1995 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 6: Hexagonal bars, tolerances on dimensions and form;
DIN EN 763:1994 Plastics piping and ducting systems – Injection-moulded thermoplastics fittings – Test method for visually assessing effects of heating;
DIN EN 802:1994 Plastics piping and ducting systems – Injection-moulded thermoplastics fittings for pressure piping systems – Test method for maximum deformation by crushing;
DIN EN 803:1994 Plastics piping systems – Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping – Test method for resistance to a short-term internal pressure without end thrust
DIN EN 804:1994 Plastics piping systems – Injection-moulded socket fittings for solvent-cemented joints for pressure piping – Test method for resistance to a short-term internal hydrostatic pressure;
DIN EN 911:1995Plastics piping systems – Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping – Test method for leaktightness under external hydrostatic pressure;
DIN EN 922:1995 Plastics piping and ducting systems – Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) – Specimen preparation for determination of the viscosity number and calculation of the K-value;
DIN EN 969:1995 Ductile iron pipes, fittings, accessories and their joints for gas pipelines – Requirements and test methods;
DIN EN 1119:1996 Plastics piping systems – Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings – Test methods for leaktightness and resistance to damage of flexible and reduced articulation joints;
DIN EN 1120:1996 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes and fittings – Determination of the resistance to chemical attack from the inside of a section in a deflected condition;
DIN EN 1229:1996 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes and fittings – Test methods to prove the leaktightness of the wall under short-term internal pressure;
DIN EN 1277:2004 Plastics piping systems – Thermoplastics piping systems for buried non-pressure applications – Test methods for leaktightness of elastomeric sealing ring type joints;
DIN EN 1716:1997 Plastics piping systems – Polyethylene (PE) tapping tees – Test method for impact resistance of an asssembled tapping tee;
DIN EN 10233:1994 Metallic materials; tube; flattening test
DIN EN 10234:1994 Metallic materials; tube; drift expanding test
DIN EN 10242:1995 Threaded pipe fittings in malleable cast iron;