Viewing 1 post (of 1 total)
  • Author
    Posts
  • #4973
    sachin
    Participant

    Temp. & Pr. Conditions of Piping Material Spec sometimes depends on actual Pr. & Temp. conditions, secondly on flange Pr.& Temp. rating as decided by ANSI B 16.5 /16.47 according to Group Material & lastly on category of fluid used. Out of these three which one to use while developing spec & why? Give other criterion if any.(Site Location- U.S.Refinery)

    Regards
    sac

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.