Hi guys,
I have a pump, with the connection called out as follows:
“Pump inlet and outlet 60.1mm Victaulic connections type PJE”
I need to connect to a DN75 Sch 80 PVC line on suction & discharge.
I’ve done the usual search on google etc, and looked at the Victaulic site, but can’t seem to find anything suitable …..
Does any one have any experience of these types of connection?
p.s. I don’t have anything in the spec for this, and there is no piping material engineer to call upon. The service is water, ambient temp …. nothing fancy!
Cheers,
Anton
.
.