- Posts: 6
- Thank you received: 0
help for the development of pipe branch,trunnions on elbows
- pjcs34
- Topic Author
- Offline
- New Member
Less More
14 years 9 months ago - 14 years 9 months ago #7595 by pjcs34
help for the development of pipe branch,trunnions on elbows was created by pjcs34
can some one indicate were i can search or find some tables and how to make a branch pipe a 30ºexample ,or a trunnion
can some one help me
can some one help me
Please Log in or Create an account to join the conversation.
- Jop
- Offline
- Moderator
Less More
- Posts: 1053
- Thank you received: 14
14 years 9 months ago - 14 years 9 months ago #5213 by Jop
Do it once and Do it Right
Replied by Jop on topic Re: help for the development of pipe branch,trunnions on elbows
pjcs34,
Your question is not clear to me. Could you please be more specific about what you want and maybe give some examples.
"Can someone indicate were I can search or find some tables and how to make a branch pipe a 30º example ,or a trunnion
can some one help me"
Can someone indicate were I can search
You can search "Google" or on this ( www.pipingdesigners.com ) web site.
find some tables
Tables for what?
how to make a branch pipe
What size branch on what size header in what type of material at what operating pressure and temperature?
a 30º example
Did you mean "AT 30º" If so why a branch at 30º? This would be an odd angle for all normal piping except for underground gravity drainage piping.
or a trunnion
What do you mean "or a Trunnion? What or a trunnion?
Please give us a little more information.
Your question is not clear to me. Could you please be more specific about what you want and maybe give some examples.
"Can someone indicate were I can search or find some tables and how to make a branch pipe a 30º example ,or a trunnion
can some one help me"
Can someone indicate were I can search
You can search "Google" or on this ( www.pipingdesigners.com ) web site.
find some tables
Tables for what?
how to make a branch pipe
What size branch on what size header in what type of material at what operating pressure and temperature?
a 30º example
Did you mean "AT 30º" If so why a branch at 30º? This would be an odd angle for all normal piping except for underground gravity drainage piping.
or a trunnion
What do you mean "or a Trunnion? What or a trunnion?
Please give us a little more information.
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
- pjcs34
- Topic Author
- Offline
- New Member
Less More
- Posts: 6
- Thank you received: 0
14 years 9 months ago - 14 years 9 months ago #5218 by pjcs34
Replied by pjcs34 on topic Re: help for the development of pipe branch,trunnions on elbows
excuse if i have writhe something rong butt i need some tables cud be 10º,20º,30º,40,45º,etc for a branch pipe to the same size or the head with 6" to 3" example
to do the development of the same is way i also refer the trunnion or (dummy) because i need the development to fit in a elbow or the correct procedure to the development of the same
if you can help me i appreciatte
excuse me writhing
cheers
paulo sousa
to do the development of the same is way i also refer the trunnion or (dummy) because i need the development to fit in a elbow or the correct procedure to the development of the same
if you can help me i appreciatte
excuse me writhing
cheers
paulo sousa
Attachments:
Please Log in or Create an account to join the conversation.
- Jop
- Offline
- Moderator
Less More
- Posts: 1053
- Thank you received: 14
14 years 9 months ago - 14 years 9 months ago #5219 by Jop
Do it once and Do it Right
Replied by Jop on topic Re: help for the development of pipe branch,trunnions on elbows
Try some of these sites:
www.murraysupply.com/pipe_fitters_guide.htm
or
www.amazon.com/Pipe-Fitters-Guid ... 0962419702
www.murraysupply.com/pipe_fitters_guide.htm
or
www.amazon.com/Pipe-Fitters-Guid ... 0962419702
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
- pjcs34
- Topic Author
- Offline
- New Member
Less More
- Posts: 6
- Thank you received: 0
14 years 9 months ago - 14 years 9 months ago #5220 by pjcs34
Replied by pjcs34 on topic Re: help for the development of pipe branch,trunnions on elbows
hi thanks for the links is very useful
butt i not seen anything of layout and developent of the pipe only in the amazone butt i have to pay ,and the tables on the www.murraysupply.com/pipe_fitters_guide.htm is all in inches
was better in metric
but i am not complaining and appreciate your help and the quicley answer to me
i steel looking for that layout formules
thanks a lot
regards
paulo sousa
butt i not seen anything of layout and developent of the pipe only in the amazone butt i have to pay ,and the tables on the www.murraysupply.com/pipe_fitters_guide.htm is all in inches
was better in metric
but i am not complaining and appreciate your help and the quicley answer to me
i steel looking for that layout formules
thanks a lot
regards
paulo sousa
Please Log in or Create an account to join the conversation.
- banerj1s
- Offline
- Senior Member
Less More
- Posts: 56
- Thank you received: 0
14 years 9 months ago - 14 years 9 months ago #5226 by banerj1s
Replied by banerj1s on topic Re: help for the development of pipe branch,trunnions on elbows
Paulo,
What kind of services are you concerned with. If it is water services and comes under AWWA then you can refer to AWWA C208.
Cheers
What kind of services are you concerned with. If it is water services and comes under AWWA then you can refer to AWWA C208.
Cheers
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.290 seconds