- Posts: 2
- Thank you received: 0
Rating
- mohsennazokkar
- Topic Author
- Offline
- New Member
Less More
17 years 10 months ago - 17 years 10 months ago #8575 by mohsennazokkar
Rating was created by mohsennazokkar
Please Log in or Create an account to join the conversation.
- whichwayisup
- Offline
- Junior Member
Less More
- Posts: 22
- Thank you received: 0
17 years 10 months ago - 17 years 10 months ago #3707 by whichwayisup
Replied by whichwayisup on topic What about it? Is there a
Please Log in or Create an account to join the conversation.
- mohsennazokkar
- Topic Author
- Offline
- New Member
Less More
- Posts: 2
- Thank you received: 0
17 years 10 months ago - 17 years 10 months ago #3717 by mohsennazokkar
Replied by mohsennazokkar on topic Do you know the effective
Please Log in or Create an account to join the conversation.
- easy-e
- Offline
- Junior Member
Less More
- Posts: 25
- Thank you received: 0
17 years 9 months ago - 17 years 9 months ago #3733 by easy-e
Replied by easy-e on topic Pick up this resource: http://www.pipefitter.com/NAVCO.html It
Pick up this resource:
www.pipefitter.com/NAVCO.html
It is the NAVCO Piping Datalog. Mine is pretty old but the info on pp. 17-21 should be the same. I think you are looking for wall thickness calculations and working pressures for pipe. You will find out the formulas for both the ANSI piping code (B31.1) and the ASME Boilder code, section 1. I hope this helps
www.pipefitter.com/NAVCO.html
It is the NAVCO Piping Datalog. Mine is pretty old but the info on pp. 17-21 should be the same. I think you are looking for wall thickness calculations and working pressures for pipe. You will find out the formulas for both the ANSI piping code (B31.1) and the ASME Boilder code, section 1. I hope this helps
Please Log in or Create an account to join the conversation.
- Calhoun
- Offline
- New Member
Less More
- Posts: 3
- Thank you received: 0
17 years 9 months ago - 17 years 9 months ago #3735 by Calhoun
Replied by Calhoun on topic Mohsennazokkar I am not sure for
Mohsennazokkar
I am not sure for the question but try this link. I hope it will help.
www.engineeringtoolbox.com/astm- ... d_742.html
I am not sure for the question but try this link. I hope it will help.
www.engineeringtoolbox.com/astm- ... d_742.html
Please Log in or Create an account to join the conversation.
- Minerva
- Offline
- New Member
Less More
- Posts: 1
- Thank you received: 0
17 years 9 months ago - 17 years 9 months ago #3740 by Minerva
Replied by Minerva on topic Rating
Could you please expand it abit more?
If you want to calculate what rating flange to use for a certain pressure you will refer to tables designated for this; remember there are various material groupes with different pressure tolerabilities. If the piping yield stress goes beyong 40ksi, use high tensile material.
Hope it assists.
If you want to calculate what rating flange to use for a certain pressure you will refer to tables designated for this; remember there are various material groupes with different pressure tolerabilities. If the piping yield stress goes beyong 40ksi, use high tensile material.
Hope it assists.
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.223 seconds