- Posts: 12
- Thank you received: 0
Natural Bend Radius (NBR)
- kannapiran.mech
-
Topic Author - Offline
- New Member
-
Less More
15 years 7 months ago - 15 years 7 months ago #7387 by kannapiran.mech
Natural Bend Radius (NBR) was created by kannapiran.mech
For steel pipe (underground) NPS 30", SCH 30 What is the Natural Bend Radius? (PIG accessible)....Is there any formula to calculate this? Depending upon the fluid used in pipes NBR will vary or not? Can anybody tell me?
Please Log in or Create an account to join the conversation.
- Jop
-
- Offline
- Moderator
-
Less More
- Posts: 1053
- Thank you received: 14
15 years 7 months ago - 15 years 7 months ago #4781 by Jop
Do it once and Do it Right
Replied by Jop on topic kannapiran What kind of pig (or
kannapiran
What kind of pig (or pigging) are you going to require?
There are lots of different pigs all with different criteria.
www.ppsa-online.com/about-pigs.php
What kind of pig (or pigging) are you going to require?
There are lots of different pigs all with different criteria.
www.ppsa-online.com/about-pigs.php
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
- kannapiran.mech
- Topic Author
- Offline
- New Member
-
Less More
- Posts: 12
- Thank you received: 0
15 years 7 months ago - 15 years 7 months ago #4782 by kannapiran.mech
Replied by kannapiran.mech on topic FOAM PIG
To Mr.Jop,
Using Polyurethane foam pig...
Using Polyurethane foam pig...
Please Log in or Create an account to join the conversation.
- Jop
-
- Offline
- Moderator
-
Less More
- Posts: 1053
- Thank you received: 14
15 years 7 months ago - 15 years 7 months ago #4783 by Jop
Do it once and Do it Right
Replied by Jop on topic Check with your "Pig" supplier
Check with your "Pig" supplier to confirm but most Foam Pigs will traverse a standard 1.5d long radius ELL.
Thus you would not need 'Bends" (for a foam Pig) unless you want them for another purpose.
Thus you would not need 'Bends" (for a foam Pig) unless you want them for another purpose.
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
- kannapiran.mech
- Topic Author
- Offline
- New Member
-
Less More
- Posts: 12
- Thank you received: 0
15 years 7 months ago - 15 years 7 months ago #4786 by kannapiran.mech
Replied by kannapiran.mech on topic OFF-PLOT work
To Mr.Jop,
Actually we are doing OFF-PLOT work...Crude Oil is taken from the manifold(existing) to process plant....In between pig is used....Distance is around 14km...
Actually we are doing OFF-PLOT work...Crude Oil is taken from the manifold(existing) to process plant....In between pig is used....Distance is around 14km...
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.310 seconds
%20-%20The%20Piping%20Designers%20Forum&description=For%20steel%20pipe%20(underground)%20NPS%2030",%20SCH%2030%20What%20is%20the%20Natural%20Bend%20Radius?%20(PIG%20accessible)....Is%20there%20any%20formula%20to%20calculate%20this?%20Depending%20upon%20the...&caption=pipingdesigners.com){kind=link}
