PipingDesigners Community

A place for piping designers, engineers and industry professionals to ask questions, share experience, discuss technical topics and connect with other professionals.

Browse the discussions below or start a new topic. Please keep discussions practical, professional and relevant to the piping and engineering community.

Forums
Community
Codes & Standards
 
Notifications
Clear all

Codes & Standards

Technical discussions covering piping codes, standards, specifications, and their practical application.

RSS
Page 2 / 9

All, I am new in Piping part of my career and starting the weight calculation. I was asked to sort according to…

Last post by Abhijit N, 12 years ago

Posts: 15
Views: 50


In the standard BS 5422 2009, it is mentioned to provide a given thickness to control the surface temperature to a…

Last post by James Pennock, 12 years ago

Posts: 3
Views: 57


governing fixed stairs and platforms around process equipment. Some vendors are telling that most designers use the…

Last post by er.piping, 12 years ago

Posts: 4
Views: 59


thickness of the 2" Sch 40S pipe in ASME b36.19 is 3.91mm. So is this possible that the pipe swells up and thickness…

Last post by Mark Layport, 12 years ago

Posts: 7
Views: 73


All, My company has decided to move the fabrication of small bore piping from the field to the shop to reduce field…

Last post by Mark Pearson, 13 years ago

Posts: 17
Views: 160


AMSE B31.3).Wall thickness Calculation for a 6"NB pipe design pressure 0.5barg to Full Vacuum. Material A106 Gr B,…

Last post by vikas, 13 years ago

Posts: 3
Views: 41


f flange of pipe that will be transported from fabrication yard to offshore site. And in case where elbo is involve,…

Last post by Legacy guest, 13 years ago

Posts: 3
Views: 31


k in cold status. Also I want to highlight that in my experience and also in accordance with some standard from very…

Last post by marck1783, 13 years ago

Posts: 3
Views: 24


Friends, In Process Industry We use many Code & standrds

Last post by Anton Dooley, 13 years ago

Posts: 3
Views: 33


When using olets, is there a max size to size limit for branch and run size. In other words, If I'm adding a olet to…

Last post by Mark Layport, 13 years ago

Posts: 5
Views: 34


Page 2 / 9
Share: