Construction & Installation

Fabrication, installation, inspection, testing and construction considerations for piping systems.

Piping Fabrication

Fabrication practices, spool production, dimensional control, materials handling and workshop considerations.

Piping Installation

Site installation, erection, alignment, support installation, access and practical construction considerations.

Welding & Joining

Welding processes, joint types, preparation, fabrication requirements and practical considerations for piping systems.

Inspection & Testing

Inspection methods, pressure testing, visual inspection, documentation and quality requirements for piping systems.

Flushing & Cleaning

Flushing, cleaning, drying and preparation of piping systems before commissioning and service.

Construction & Commissioning

Construction completion, system turnover, commissioning activities, punch lists and handover requirements.

Articles

  • Blog 1D: Piping Fit-Up, The difference between Optimism and Reality

    Recently, on one of the leading internet technical forums, a person posted a concern about a perceived engineering problem. Their concern was about the relative…

  • Blog 1P: Fitting to Fitting

    The following statement was made in a communication about welding two fittings directly to each other. This situation also applies to a fitting welded to…

  • Checking of Pipe Fabrication Shop Drawings

      There will come a time the life of almost every project when the question of checking of pipe fabrication shop spool drawings will come…

  • Dimensioning above and beyond

      Have you ever been in the field and had a pipe, object, or point that is just out of reach. I’ve had that problem also.…

  • Field Trip Guidlines

      What is involved when you are asked to go to the field?  If you are truly a knowledgeable and experienced designer or engineer you are…

  • Finding odd angles in the field

      Sometimes, mostly never, things do not get installed in the field as square as they are on our models and drawings. So we either…

  • Locating Field Welds

    The goal of all projects is to do as much welding as is possible in the controlled environment of a fabrication shop in order to…

  • Measuring field pipe

      To add or modify piping that is in the field, we need to verify what we are working with first. Before going to the…

  • Photographs with intelligence

    When I’m out at multiple sites, sometimes I forget which picture goes with each site. This app is called Theodolite. The more information that you…

  • Pipe Fab Shop Tonnage Estimating Tools – Downloads

    Pipe Fab Shop Tonnage Estimating Tools – Downloads   Title Description Format Shop Fabrication Piping Tonnage Estimate Instructions (Word) This excel tool was developed to provide…

  • Pipe Fabrication Shop Assignment Questions and Problems

      On any process plant project the pipe fabrication shop should be recognized as a key player and a partner in the success of that…

  • Piping Isometrics

    Introduction: The word ‘Isometric’ has its origins in Greek which is the case with many English words. It is derived from Greek word ‘Isometros’, of…

  • Puddle Flanges

    Where pipes pass through external walls, in basement areas, a puddle flange may be required. Location which may be below the water table or in…

  • Sketching and Baseline

      My last few projects have been low budget, no survey team, minimum field support, and no one available to assist in field data gathering. Sometimes…

  • Sketching and Baseline

    My last few projects have been low budget, no survey team, minimum field support, and no one available to assist in field data gathering. Sometimes…

  • Strapping Tanks

      Locating nozzles on existing tanks and cylindrical vessels The term “strapping” is the term used to locating nozzles and other item on a tank…

View all articles in Construction & Installation

Report an error