- Posts: 66
- Thank you received: 0
Steam Blow Out
- skgarg
-
Topic Author - Offline
- Senior Member
-
Less More
13 years 2 months ago - 13 years 2 months ago #8016 by skgarg
Steam Blow Out was created by skgarg
Hi Pipers
Do we need to slope Steam blow Out Pipes ?
These are the temporary lines used in the start up for the steam blowing cleaning concept for HRSG and main steam lines.
The problem in sloping these lines is the run of these lines are very long as coming from the Turbine valves and going out of the Building almost 35 meters (due to some noise norms and all) so support concept becomes difficult.
can I avoid slope in these lines?
Share your experience!
Regards
SG
Do we need to slope Steam blow Out Pipes ?
These are the temporary lines used in the start up for the steam blowing cleaning concept for HRSG and main steam lines.
The problem in sloping these lines is the run of these lines are very long as coming from the Turbine valves and going out of the Building almost 35 meters (due to some noise norms and all) so support concept becomes difficult.
can I avoid slope in these lines?
Share your experience!
Regards
SG
Please Log in or Create an account to join the conversation.
- Jop
-
- Offline
- Moderator
-
Less More
- Posts: 1053
- Thank you received: 14
13 years 2 months ago - 13 years 2 months ago #6179 by Jop
Do it once and Do it Right
Replied by Jop on topic Re: Steam Blow Out
Based on only the facts you have given (Steam blow Out lines; temporary; start up; cleaning for HRSG and main steam lines) I would agree that Sloping the lines is not mandatory.
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
- mnagpal
-
- Offline
- New Member
-
Less More
- Posts: 2
- Thank you received: 0
13 years 2 months ago - 13 years 2 months ago #6180 by mnagpal
Replied by mnagpal on topic Re: Steam Blow Out
I agree to Jop.
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.170 seconds
