- Posts: 66
- Thank you received: 0
instruments in GRP pipes..
- skgarg
- Topic Author
- Offline
- Senior Member
Less More
12 years 10 months ago - 12 years 10 months ago #8061 by skgarg
instruments in GRP pipes.. was created by skgarg
Hi Pipers
How do I install temperature and pressure instruments in GRP / FRP pipes ?
Please share your experience with theoretically and practically insight.
Regards
SG
How do I install temperature and pressure instruments in GRP / FRP pipes ?
Please share your experience with theoretically and practically insight.
Regards
SG
Please Log in or Create an account to join the conversation.
- Jop
- Offline
- Moderator
Less More
- Posts: 1053
- Thank you received: 14
12 years 10 months ago - 12 years 10 months ago #6331 by Jop
Do it once and Do it Right
Replied by Jop on topic Re: instruments in GRP pipes..
One way to do this is to install an GRP/FRP flanged joint and a "Bleed Ring" (with a tapped outlet) for the instrument, vent, drain, etc.
Go here:
www.mac-weld.com/FlushRing-Bleed ... dRing.html
Go here:
www.mac-weld.com/FlushRing-Bleed ... dRing.html
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
- Bobby
- Offline
- New Member
Less More
- Posts: 1
- Thank you received: 0
12 years 10 months ago - 12 years 10 months ago #6334 by Bobby
Replied by Bobby on topic Re: instruments in GRP pipes..
Hi skgarg,
Another way half pipe saddles with stainless steel thread bushing
Check Ameron GRE under downloads <Product guide Bondstrand 2000/4000/7000 for general service>
www.ameron-fpg.com/?i=401&t=oilgas&d=oilgas
Rgs.
Bobby
Another way half pipe saddles with stainless steel thread bushing
Check Ameron GRE under downloads <Product guide Bondstrand 2000/4000/7000 for general service>
www.ameron-fpg.com/?i=401&t=oilgas&d=oilgas
Rgs.
Bobby
Please Log in or Create an account to join the conversation.
- 11echo
- Offline
- Platinum Member
Less More
- Posts: 351
- Thank you received: 5
12 years 10 months ago - 12 years 10 months ago #6336 by 11echo
Replied by 11echo on topic Re: instruments in GRP pipes..
I've used FRP threaded saddles for instrument connections, check this link out ...drop down to sheet 8 for threaded saddles.
www.ifs-frp.com/PDFs/ThrdFitPrice.pdf
www.ifs-frp.com/PDFs/ThrdFitPrice.pdf
Please Log in or Create an account to join the conversation.
- Willis
- Offline
- New Member
Less More
- Posts: 15
- Thank you received: 0
12 years 10 months ago - 12 years 10 months ago #6037 by Willis
Replied by Willis on topic Re: instruments in GRP pipes..
For a more corrosive service, our project opted for a complete reducing tee, nipple and flange arrangement for all instruments, as well as drains, on FRP pipe (2" min branch size). I have also used bleed rings and this method is definitely a space/ cost saver compared to the previous.
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.218 seconds