Sewer hub splashguard
- Bob
-
Topic Author - Offline
- Senior Member
-
Less More
15 years 6 days ago - 15 years 6 days ago #7539 by Bob
Sewer hub splashguard was created by Bob
HI,
I'm looking for a sewer hub splashguard (with overpressurization vent) for dumping 250# condensate into a plant sewer system. Any ideas, catalog cuts, etc. Don't want to overpressure the sewer system... therefore the vent.
Thanks,
Bob
I'm looking for a sewer hub splashguard (with overpressurization vent) for dumping 250# condensate into a plant sewer system. Any ideas, catalog cuts, etc. Don't want to overpressure the sewer system... therefore the vent.
Thanks,
Bob
Please Log in or Create an account to join the conversation.
- Jop
-
- Offline
- Moderator
-
Less More
- Posts: 1053
- Thank you received: 14
15 years 5 days ago - 15 years 5 days ago #5097 by Jop
Do it once and Do it Right
Replied by Jop on topic Re: Sewer hub splashguard
Condensate is a valuable commodity. You (your plant) spent a lot of time and money treating the raw water and adding chemicals to make "boiler feed water". You should not throw it away. You should collect it, route it to a condensate flash drum then with a small pump return it to the treated water make-up system..
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.171 seconds
%20for%20dumping%20250#%20condensate%20into%20a%20plant%20sewer%20system.%20Any%20ideas,%20catalog%20cuts,%20etc....&caption=pipingdesigners.com){kind=link}
