- Posts: 1053
- Thank you received: 14
ROUTING
- AGHIL
-
Topic Author - Visitor
-
15 years 10 months ago - 15 years 10 months ago #7350 by AGHIL
ROUTING was created by AGHIL
HELLO FRIENDS
PLEASE GIVE ME HELP ABOUT BEST PIPE ROUTING.
I WANT SOME TIPS AND USEFUL GUIDSE IN PIPE ROUTING THAT A PIPING DESIGNER SHALL BE KNOW.
BEST REGARDS,
AGHIL
PLEASE GIVE ME HELP ABOUT BEST PIPE ROUTING.
I WANT SOME TIPS AND USEFUL GUIDSE IN PIPE ROUTING THAT A PIPING DESIGNER SHALL BE KNOW.
BEST REGARDS,
AGHIL
Please Log in or Create an account to join the conversation.
- Jop
-
- Offline
- Moderator
-
Less More
15 years 10 months ago - 15 years 10 months ago #4703 by Jop
Do it once and Do it Right
Replied by Jop on topic Aghil, Please go to the "Tips"
Aghil,
Please go to the "Tips" section of this web site (use the buttons at the top of the screen) and read the article "Thinking Outside the Box".
Then go the the "Training" section and read the article under Stress. While you are there it might be helpful to read all the other articles.
Then come back here and ask specific questions about what you do not understand. Someone will help you.
Best wishes,
Jop
Please go to the "Tips" section of this web site (use the buttons at the top of the screen) and read the article "Thinking Outside the Box".
Then go the the "Training" section and read the article under Stress. While you are there it might be helpful to read all the other articles.
Then come back here and ask specific questions about what you do not understand. Someone will help you.
Best wishes,
Jop
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
- AGHIL
- Topic Author
- Visitor
-
15 years 9 months ago - 15 years 9 months ago #4708 by AGHIL
Replied by AGHIL on topic MR JOP THANKS FOR YOUR ATTENTION I
MR JOP
THANKS FOR YOUR ATTENTION
I READ YOUR ANSWER AND I DO YOUR ORDER , BUT AT THE MOMENT , I NEED SOME PRACTICAL ADVICES ABOUT PIPING AROUND OF FOR EXAMOLE A PUMP OR A COMPRESSOR AND SO ON(ANY SUBJECT). THAT IS USEFUL FOR FUTURE MAINTANANCE.
I APOLOGIZE BECAUSE I KNOW MY REQURST IS BIG.
BEST REGARDS,
AGHIL MOGHBELI
THANKS FOR YOUR ATTENTION
I READ YOUR ANSWER AND I DO YOUR ORDER , BUT AT THE MOMENT , I NEED SOME PRACTICAL ADVICES ABOUT PIPING AROUND OF FOR EXAMOLE A PUMP OR A COMPRESSOR AND SO ON(ANY SUBJECT). THAT IS USEFUL FOR FUTURE MAINTANANCE.
I APOLOGIZE BECAUSE I KNOW MY REQURST IS BIG.
BEST REGARDS,
AGHIL MOGHBELI
Please Log in or Create an account to join the conversation.
- Jop
-
- Offline
- Moderator
-
Less More
- Posts: 1053
- Thank you received: 14
15 years 9 months ago - 15 years 9 months ago #4709 by Jop
Do it once and Do it Right
Replied by Jop on topic Aghil, 1st - I think
Aghil,
1st - I think you meant to say "example" not "EXAMOLE", is that right?
2nd - What kind of Pump? Centrifugal? Positive Displacement? Gear? Diaphragm?
There are a lot different kinds of pumps and the piping is vastly different from one type to another. The only things that are common from one type to another is the basics.
These basics include:
Functionality: It must be able to do its intended job.
Operational Reliability: Operators must be able to rely on that pump and the associated piping, Instruments, etc to work properly.
Safety: The pump must work in a safe manner, hopefully all the time.
Maintainability: The pump and its associated piping must be arranged in such a manner that both planned and emergency maintenance can be performed in a timely, safe and cost effective manner.
3rde - What kind of Compressor? Centrifugal? or Reciprocating?
If Centrifugal - Is it a Vertical Split Case? or Horizontal Split Case? Is it a top suction/top discharge? or is it a bottom suction/bottom discharge? or is it something else?
If Reciprocating - How many cylinders (stages) does it have? Will there be Suction Knock-Out Drums? Pulsation Dampers on the suction and discharge? Discharge Knock-Out Drums? How many Recip. Compressors will there be?
4th - What kind of plant are you designing? Is this an Oil Refinery? A Chemical Plant? Is this on Land or on an Offshore Platform?
By now you can see that you have asked a very complex question. Maybe you could narrow this down for us
Above all, please don't lose heart. Give us more information and I'm sure we can help.
I also recommend the following book:
Process Plant Layout and Design
Ed. Bausbacher and Roger Hunt
Auerbach Publishers
ISBN 0-7913-0543-5
It is a very good book that will answer a lot of your questions.
1st - I think you meant to say "example" not "EXAMOLE", is that right?
2nd - What kind of Pump? Centrifugal? Positive Displacement? Gear? Diaphragm?
There are a lot different kinds of pumps and the piping is vastly different from one type to another. The only things that are common from one type to another is the basics.
These basics include:
Functionality: It must be able to do its intended job.
Operational Reliability: Operators must be able to rely on that pump and the associated piping, Instruments, etc to work properly.
Safety: The pump must work in a safe manner, hopefully all the time.
Maintainability: The pump and its associated piping must be arranged in such a manner that both planned and emergency maintenance can be performed in a timely, safe and cost effective manner.
3rde - What kind of Compressor? Centrifugal? or Reciprocating?
If Centrifugal - Is it a Vertical Split Case? or Horizontal Split Case? Is it a top suction/top discharge? or is it a bottom suction/bottom discharge? or is it something else?
If Reciprocating - How many cylinders (stages) does it have? Will there be Suction Knock-Out Drums? Pulsation Dampers on the suction and discharge? Discharge Knock-Out Drums? How many Recip. Compressors will there be?
4th - What kind of plant are you designing? Is this an Oil Refinery? A Chemical Plant? Is this on Land or on an Offshore Platform?
By now you can see that you have asked a very complex question. Maybe you could narrow this down for us
Above all, please don't lose heart. Give us more information and I'm sure we can help.
I also recommend the following book:
Process Plant Layout and Design
Ed. Bausbacher and Roger Hunt
Auerbach Publishers
ISBN 0-7913-0543-5
It is a very good book that will answer a lot of your questions.
Do it once and Do it Right
Please Log in or Create an account to join the conversation.
- AGHIL
- Topic Author
- Visitor
-
15 years 9 months ago - 15 years 9 months ago #4710 by AGHIL
Replied by AGHIL on topic DEAR JOP, THANKS FOR YOUR ANSWER. MY
DEAR JOP,
THANKS FOR YOUR ANSWER.
MY ENGLISH IS NOT GOOD.
I START WORKING ON A OFFSHORE PROJECT IN THE SOUTH OF IRAN(DETAIL DESIGN). SO I NEED YOUR HELPS.
PLEASE IF THERE IS AN E.BOOK OR PAMPHLET ABOUT OFFSHORE (OR PIPING ) SEND TO MY EMAIL.
I WILL BUY THAT BOOK( PROCESS PLANT...)
I LOOK FORWARD TO HEARING FROM YOU.
THANKS A LOT,
AGHIL
THANKS FOR YOUR ANSWER.
MY ENGLISH IS NOT GOOD.
I START WORKING ON A OFFSHORE PROJECT IN THE SOUTH OF IRAN(DETAIL DESIGN). SO I NEED YOUR HELPS.
PLEASE IF THERE IS AN E.BOOK OR PAMPHLET ABOUT OFFSHORE (OR PIPING ) SEND TO MY EMAIL.
I WILL BUY THAT BOOK( PROCESS PLANT...)
I LOOK FORWARD TO HEARING FROM YOU.
THANKS A LOT,
AGHIL
Please Log in or Create an account to join the conversation.
- piolopaskual
-
- Offline
- New Member
-
Less More
- Posts: 13
- Thank you received: 0
12 years 7 months ago - 12 years 7 months ago #6447 by piolopaskual
Replied by piolopaskual on topic Re: ROUTING
OK. Then may I just request the moderator to zap all my posting. And extend my apology to all for having wasted their time.
Dont worry hc, I'll make sure that all my posting are gone. Goodbye
Dont worry hc, I'll make sure that all my posting are gone. Goodbye
Please Log in or Create an account to join the conversation.
Moderators: Jop
Time to create page: 0.277 seconds
