Jop precise answer ... ur my favourite

Ikram, Few more information are required before your question can be answered. 1. What is the operating and design temperature of the pipeline? 2. ...

Adding to what Jop said drains near the turbine are according to ASME TDP 1. Normally steam is injected in the turbine at a steady superheat temperatu...

MCW: Main Cooling Water System. Cooling water from Open source or Cooling tower to Surface condenser often called as Circulating Water System (KKS not...

You can possibly do but you are inviting several other problems. The Nut might not fit. You need a washer that works with the material. The bolt may b...

I agree with Bob that B31.3 does provide guidance on Formal Stress Analysis criteria but it stops short of specifying what should be the temperature o...

I would appreciate this video because it does show an erection sequence and are excellent tools to impress the client. It is important to understand ...

Do you mean heater drain system? Deaerator normally blows down to atmospheric tank. The line doesnt need a steam trap. Also the same for overflow line...

I guess you refer to Condensate Extraction Pump (CEP) for power plants. CEP are used to pump water from Condenser Hotwell to the Steam Water Cycle for...

The manufacturer may be the best person to answer that question. Normally you may need to access the valve twice or once a year. For quick closing va...

Paulo, What kind of services are you concerned with. If it is water services and comes under AWWA then you can refer to AWWA C208. Cheers

Paulo, What kind of services are you concerned with. If it is water services and comes under AWWA then you can refer to AWWA C208. Cheers

For your first question please refer ASME B 31.1 para 102.3.2. That gives you the allowable stress for cycles equal or greater than 10^8 cycles. For...