PipingDesigners Community
A place for piping designers, engineers and industry professionals to ask questions, share experience, discuss technical topics and connect with other professionals.
Browse the discussions below or start a new topic. Please keep discussions practical, professional and relevant to the piping and engineering community.
Sorry Anton I just posted this
For Crashtested and all those interested enough to visit my site over the last month I have just added another module titled Rotating Equipment - Pum...
Jop , When I came across your post I couldn't believe your former Piping Manager had coined the phrase “In piping there is a reason for everything.”, ...
I agree with everything you say Mick, but reading between the lines I think we are talking about the difference in the way things were versus the way ...
As Anton says the main point here is that the top works of the control valve must be able to be easily removed for maimtaince. How a designer achieves...
There are many requirements in a fabrication spec. It is the responsibility of the fabricator to interpret all of the clients requirements on their sp...
The point is that your model is built to the correct dimensions and the additional 150mm is required because of the uncertainty that a particular conn...
Hi Anton, I agree with your assessment but it also has to be said that there is still a degree of CAD resentment and nonacceptance amongst some of th...