Standards 40: European Committee for Standardization CEN/TC 69 – Published standards
European Committee for Standardization CEN/TC 69 – Published standards http://www.cen.eu/CEN/Sectors/TechnicalCommitteesWorkshops/CENTechnicalCommittees/Pages/Standards.aspx?param=6052&title=CEN%2FTC+69 Standard referenceTitleCitation in OJDirective CEN/TS 13547:2006 Industrial valves – Copper alloy ball valves No 97/23/EC EN 1074-1:2000 Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 1: General requirements No 93/38/EEC EN 1074-2:2000 Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 2: Isolating valves No 93/38/EEC EN 1074-2:2000/A1:2004 Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 2: Isolating valves No 93/38/EEC EN 1074-3:2000 Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 3: Check valves No 93/38/EEC EN 1074-4:2000 Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 4: Air valves No 93/38/EEC EN 1074-5:2001 Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 5: Control valves No 93/38/EEC EN 1074-6:2008 Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 6: Hydrants No – EN 1171:2002 Industrial valves – Cast iron gate valves Expected 97/23/EC EN 12266-1:2003 Industrial valves – Testing of valves – Part 1: Pressure tests, test procedures and acceptance criteria – Mandatory requirements Cited in OJC 115 (1999-04-28) 97/23/EC EN 12266-2:2002 Industrial valves – Testing of valves – Part 2: Tests, test procedures and acceptance criteria – Supplementary requirements No 97/23/EC EN 12288:2010 Industrial valves – Copper alloy gate valves Expected 97/23/EC EN 12334:2001 Industrial valves – Cast iron check valves Expected 97/23/EC EN 12334:2001/A1:2004 Industrial valves – Cast iron check valves Expected 97/23/EC EN 12334:2001/AC:2002 Industrial valves – Cast iron check valves Expected 97/23/EC EN 12351:2010 Industrial valves – Protective caps for valves with flanged connections No – EN 12516-1:2005 Industrial valves – Shell design strength – Part 1: Tabulation method for steel valve shells Expected 97/23/EC EN 12516-1:2005/AC:2007 Industrial valves – Shell design strength – Part 1: Tabulation method for steel valve shells Expected 97/23/EC EN 12516-2:2004 Industrial valves – Shell design strength – Part 2: Calculation method for steel valve shells Expected 97/23/EC EN 12516-3:2002 Valves – Shell design strength – Part 3: Experimental method Expected 97/23/EC EN 12516-3:2002/AC:2003 Valves – Shell design strength – Part 3: Experimental method Expected 97/23/EC EN 12516-4:2008 Industrial valves – Shell design strength – Part 4: Calculation method for valve shells manufactured in metallic materials other than steel Cited in OJC 46 (2009-02-25),C 111 (2008-05-06) 97/23/EC EN 12567:2000 Industrial valves – Isolating valves for LNG – Specification for suitability and appropriate verification tests No 97/23/EC EN 12569:1999 Industrial valves – Valves for chemical and petrochemical process industry – Requirements and tests No – EN 12569:1999/AC:2000 Industrial valves – Valves for chemical and petrochemical process industry – Requirements and tests No – EN 12570:2000 Industrial valves – Method for sizing the operating element No 97/23/EC,89/106/EEC EN 12627:1999 Industrial valves – Butt welding ends for steel valves No 97/23/EC EN 1267:1999 Valves – Test of flow resistance using water as test fluid No 97/23/EC EN 12760:1999 Valves – Socket welding ends for steel valves No 97/23/EC EN 12982:2009 Industrial valves – End-to-end and centre-to-end dimensions for butt welding end valves No 97/23/EC EN 13397:2001 Industrial valves – Diaphragm valves made of metallic materials Cited in OJC 171 (2002-07-17) 97/23/EC EN 1349:2009 Industrial process control valves Expected 97/23/EC EN 13709:2010 Industrial valves – Steel globe and globe stop and check valves Expected 97/23/EC EN 13774:2003 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar – Performance requirements No 97/23/EC EN 13789:2010 Industrial valves – Cast iron globe valves Expected 97/23/EC EN 14141:2003 Valves for natural gas transportation in pipelines – Performance requirements and tests No – EN 14341:2006 Industrial valves – Steel check valves Expected 97/23/EC EN 1503-1:2000 Valves – Materials for bodies, bonnets and covers – Part 1: Steels specified in European Standards No 97/23/EC,89/106/EEC EN 1503-2:2000 Valves – Materials for bodies, bonnets and covers – Part 2: Steels other than those specified in European Standards No 97/23/EC EN 1503-3:2000 Valves – Materials for bodies, bonnets and covers – Part 3: Cast irons specified in European Standards No 97/23/EC EN 1503-3:2000/AC:2001 Valves – Materials for bodies, bonnets and covers – Part 3: Cast irons specified in European Standards No – EN 1503-4:2002 Valves – Materials for bodies, bonnets and covers – Part 4: Copper alloys specified in European Standards No 97/23/EC EN 15081:2007 Industrial valves – Mounting kits for part-turn valve actuator attachment No – EN 15389:2008 Industrial valves – Performance characteristics of thermoplastic valves when used as construction products No 89/106/EEC EN 15714-1:2009 Industrial valves – Actuators – Part 1: Terminology and definitions No 97/23/EC EN 15714-2:2009 Industrial valves – Actuators – Part 2: Electric actuators for industrial valves – Basic requirements No 97/23/EC EN 15714-3:2009 Industrial valves – Actuators – Part 3: Pneumatic part-turn actuators for industrial valves – Basic requirements No 97/23/EC EN 15714-4:2009 Industrial valves – Actuators – Part 4: Hydraulic part-turn actuators for industrial valves – Basic requirements No 97/23/EC EN 19:2002 Industrial valves – Marking of metallic valves Cited in OJC 171 (2002-07-17) 97/23/EC,89/106/EEC EN 1983:2006 Industrial valves – Steel ball valves Expected 97/23/EC EN 1984:2010 Industrial valves – Steel gate valves Expected 97/23/EC EN 26553:1991 Automatic steam traps – Marking (ISO 6553:1980) No 97/23/EC EN 26554:1991 Flanged automatic steam traps – Face-to-face dimensions (ISO 6554:1980) No 97/23/EC EN 26704:1991 Automatic steam traps – Classification (ISO 6704:1982) No 97/23/EC EN 26948:1991 Automatic steam traps – Production and performance characteristic tests (ISO 6948:1981) No – EN 27841:1991 Automatic steam traps – Determination of steam loss – Test methods (ISO 7841:1988) No 97/23/EC EN 27842:1991 Automatic steam traps – Determination of discharge capacity – Test methods (ISO 7842:1988) No 97/23/EC EN 28233:1990 Thermoplastics valves – Torque – Test method (ISO 8233:1988) No 97/23/EC,93/38/EEC,90/531/EEC,89/106/EEC EN 28659:1990 Thermoplastics valves – Fatigue strength – Test method (ISO 8659:1989) No 97/23/EC,93/38/EEC,90/531/EEC,89/106/EEC EN 558:2008 Industrial valves – Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems – PN and Class designated valves No 97/23/EC EN 593:2009 Industrial valves – Metallic butterfly valves Cited in OJC 226 (2009-09-19) 97/23/EC EN 736-1:1995 Valves – Terminology – Part 1: Definition of types of valves No 97/23/EC EN 736-2:1997 Valves – Terminology – Part 2: Definition of components of valves No 97/23/EC EN 736-3:2008 Valves – Terminology – Part 3: Definition of terms No – EN ISO 10434:2004 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004) No – EN ISO 10497:2010 Testing of valves – Fire type-testing requirements (ISO 10497:2010) No 97/23/EC EN ISO 15848-1:2006 Industrial valves – Measurement, test and qualification procedures for fugitive emissions – Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2006) No – EN ISO 15848-2:2006 Industrial valves – Measurement, test and qualification procedures for fugitive emissions – Part 2: Production acceptance test of valves (ISO 15848-2:2006) No – EN ISO 16135:2006 Industrial valves – Ball valves of thermoplastics materials (ISO 16135:2006) Expected 97/23/EC EN ISO 16136:2006 Industrial valves – Butterfly valves of thermoplastics materials (ISO 16136:2006) Expected 97/23/EC EN ISO 16137:2006 Industrial valves – Check valves of thermoplastics materials (ISO 16137:2006) Expected 97/23/EC EN ISO 16138:2006 Industrial valves – Diaphragm valves of thermoplastics materials (ISO 16138:2006) Expected 97/23/EC EN ISO 16139:2006 Industrial valves – Gate valves of thermoplastics materials (ISO 16139:2006) Expected 97/23/EC EN ISO 17292:2004 Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2004) No – EN ISO 21787:2006 Industrial valves – Globe valves of thermoplastics materials (ISO 21787:2006) Expected 97/23/EC EN ISO 4126-1:2004 Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2004) Expected 97/23/EC EN ISO 4126-1:2004/AC:2006 Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2004) Expected 97/23/EC EN ISO 4126-2:2003 Safety devices for protection against excessive pressure – Part 2: Bursting disc safety devices (ISO 4126-2:2003) No 97/23/EC EN ISO 4126-2:2003/AC:2006 Safety devices for protection against excessive pressure – Part 2: Bursting disc safety devices (ISO 4126-2:2003) No 97/23/EC EN ISO 4126-3:2006 Safety devices for protection against excessive pressure – Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006) Expected 97/23/EC EN ISO 4126-4:2004 Safety devices for protection against excessive pressure – Part 4: Pilot operated safety valves (ISO 4126-4:2004) Expected 97/23/EC EN ISO 4126-5:2004 Safety devices for protection against excessive pressure – Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2004) Expected 97/23/EC EN ISO 4126-5:2004/AC:2008 Safety devices for protection against excessive pressure – Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2004/Cor 1:2006/Cor 2:2007) Expected 97/23/EC EN ISO 4126-6:2003 Safety devices for protection against excessive pressure – Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2003) No 97/23/EC EN ISO 4126-6:2003/AC:2006 Safety devices for protection against excessive pressure – Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2003) No 97/23/EC EN ISO 4126-7:2004 Safety devices for protection against excessive pressure – Part 7: Common data (ISO 4126-7:2004) No 97/23/EC EN ISO 4126-7:2004/AC:2008 Safety devices for protection against excessive pressure – Part 7: Common data (ISO 4126-7:2004/Cor 1:2006) No 97/23/EC EN ISO 5210:1996 Industrial valves – Multi-turn valve actuator attachments (ISO 5210:1991) No 97/23/EC EN ISO 5211:2001 Industrial valves – Part-turn actuator attachments (ISO 5211:2001) No 97/23/EC
Related reading
Series: Piping Standards Series | Previous: Standards 39: Threaded & Socket Welded Fittings – Pressure Classes and Schedules | Next: –