PipingDesigners Community
A place for piping designers, engineers and industry professionals to ask questions, share experience, discuss technical topics and connect with other professionals.
Browse the discussions below or start a new topic. Please keep discussions practical, professional and relevant to the piping and engineering community.
MTO, BOM & BOQ –
What’s the difference, and when are...
[article=link]144[/article]
Thanks Anton but is it not the secondary MTO that becomes BOQ, the moment a RFQ is issued & MTO calculated by client becomes the BOQ for contractors.
Nice article..it is crystal clear.
good job
Thanks Mr. Anton. If you wont mind, could you also provide details on industry norms for the BOQ measurements. I know that it varies from one EPC contractor to another due to construction culture differences but it is very interesting to know how the quantities are presented in BOQs. For example, the pressure test work volume would be prepared and generally quantified in cu.m but others would prefer it on linear meter length per size, pipe support in no. of pcs instead of tonnage, Radiographic test in terms of no. of films instead of quantity of joint per size, etc.