PipingDesigners Community
A place for piping designers, engineers and industry professionals to ask questions, share experience, discuss technical topics and connect with other professionals.
Browse the discussions below or start a new topic. Please keep discussions practical, professional and relevant to the piping and engineering community.
For a more corrosive service, our project opted for a complete reducing tee, nipple and flange arrangement for all instruments, as well as drains, on ...
A "simplified" stress analysis tool in PDS/ PDMS/SmartPlant/ etc.. that would indicate basic failures in piping layout that could be avoided prior to ...
Here is a link I found showing a 60' module with pipe sizes ranging from 2" to 48". Also, SPMT transporting module through plant-site. Normally, we us...
@willis ....my only concern is interface between two sub modules .n would it be possible to maintain slope in 4 parts Regards SG I don't see how a su...
No physical site experience with this but most projects I have worked on with modular pipe racks were welded connections for metallic pipe. As far as ...
Wills ...I agree with you about using unions to deal with leaking threaded pipe! ...BUT since threaded random lengths of pipe come with one threaded...
If a coupled joint is leaking in the piperack, tightening one joint would result in rotating the entire pipe run. With a union every so often you can ...
It is also a good idea when using Threaded and Coupled pipe in pipe racks to use unions every 3-4 random lengths. This will aid in maintenance if leak...
Unfortunately I have found myself in this same boat for the last few years, with process, piping, mechanical, and structural all starting at the same ...
Unfortunately I have found myself in this same boat for the last few years, with process, piping, mechanical, and structural all starting at the same ...
I have also seen FFW used to specify a "Field Fit-up Weld" which indicates that additional pipe length will be provided for field adjustment.
I have also seen FFW used to specify a "Field Fit-up Weld" which indicates that additional pipe length will be provided for field adjustment.
Maybe not an easy solution but there are companies who supply leak detection services using Infrared technology.
Maybe not an easy solution but there are companies who supply leak detection services using Infrared technology.
In addition to the answers above, I had a go at some I could add my .02. 10. Explain what is a “Double block & Bleed†valve? Why we need a b...